ABB FOX615 Installation & User Manual page 86

I N S T A L L A T I O N P R O C E D U R E S
Front cover removal Proceed as follows:
84
1. To unlock the cover tear the outer edge of the left hand and the right hand
lock (1) while applying force to the front cover towards the subrack (A).
2. Rotate now the upper edge of the front cover outward (2) while retaining
the locks (1) in their unlocked position (B).
3. Continue rotating the cover outward (3) until it reaches the horizontal
position.
4. Remove lower lids of the front cover (4) from the slots of the left and right
side earthing bars (5).
5. Remove the cover completely (C).
End of instruction
Risk of operating trouble!
Attention to EMC properties!
The FOX subrack without its front cover mounted does not comply with all
EMC standards.
→ To make sure the FOX615 complies with EMC standards, fit the front
cover after installation work has been completed as described in sec-
tion Mounting the front cover (on page 81).

FOX615 Installation