Figure 36: Installation Of The Famo1 Or Famo1-F Power And Alarm Cable - ABB FOX615 Installation & User Manual

Connection of the FAMO1 or
FAMO1-F power and alarm
interface

FOX615 Installation
21
F1
50
m ov ing fa ns
re fe r to ha ndbook
P
31
Figure 36: Installation of the FAMO1 or FAMO1-F power and alarm
cable
Proceed as follows:
1. The subminiature-D connector has been connected to the P
the FOX subrack before the subrack installation (refer to section
ing the FAMO1 or FAMO1-F power and alarm cable (optional)
page 55)).
2. Tie the FAMO1 or FAMO1-F power and alarm cable (31) from the cable
tray along the left bracket of the subrack up to the FAMO1 or FAMO1-F.
3. Plug the Molex connector to the F1 interface of the FAMO1 or FAMO1-F.
4. Secure the FAMO1 or FAMO1-F power and alarm cable in cable clamp
(21).
5. Check the lock of the Molex connector for safe fit.
6. Arrange the cable in such a way that it does not block the fixing slots for
the subrack front cover in the brackets.
End of instruction
I N S T A L L A T I O N P R O C E D U R E S
fa n 4 8 VDC 1 9 " 1 U R2 A
3 7 9 7 0 0 0 3 2 1 1 1 7 4 3 4 7 3
2 0 1 1 W4 4
F 2 : Ala rm output F 3 : Ala rm inputs
1 -2 1 -4
2
22
F4 : Ala rm inputs F 5 : Ala rm inputs
5 -8 9 -1 2
interface of
2
Install-
(on
65