Motorola DIMETRA MTS 4 Installation, Configuration, And Service Manual page 63

Applicant: Motorola Solutions Equipment Type: ABZ89FC5827 / 109AB-5827
Radio Frequency Distribution System | 235
Figure 141: MTS LiTE / MTS 2 Preselector
Note: Unused RX outputs should be terminated.
The MTS LiTE/MTS 2 Preselector only has two RX outputs and no expansion output. In MTS LiTE/MTS 2 the
Preselector has an integrated high performance low noise amplifier (LNA). The supply voltage for the LNA is
supplied through the RX out connected to the Base Radios. The Preselector has two outlets for two Base Radios. The
antenna connectors are DIN 7–16, the receive side is connected with QMA connectors. See the block schematic of the
MTS LiTE/MTS 2 Preselector in the following figure.
6802800U74-AD | September 2014 | Send Feedback
Exhibit D2