Table 110: Transmit Specifications - Teds - Motorola DIMETRA MTS 4 Installation, Configuration, And Service Manual

Applicant: Motorola Solutions
Transmitter Specification
Intermodulation Attenuation
RF Input Impedance
Table 110: Transmit Specifications – TEDS
Transmitter Specification
QAM (TEDS) Transmitted Power (10, 20 Watts depending on
the configuration) measured at RFDS antenna port:
Normal Conditions:
Extreme Conditions:
Transmitter Power (off/standby)
Frequency Stability
Base Radio Power Limits
Transmitter Power Control
Transmitter Modulation Accuracy
Synchronization
Adjacent-channel power (25kHz)
Adjacent-channel power (50kHz)
Adjacent-channel Power due to Switching
Tx Conducted Emission (25kHz TEDS)
Equipment Type: ABZ89FC5827 / 109AB-5827
Value or Range
250 - 500 kHz
500 - frb kHz
At receive band
70 dB
50 (nom.)
Value or Range
10 W, 20 W
+2.0 dB
+3.0/-4.0 dB
-36 dBm/-40 dBc
± 0.007 ppm
Note: Stability with site reference con-
nected to station and locked to GPS.
High Power TEDS BR: 2W - 32 W
Note: Base Radio Power Limits above
are also applicable for 800 MHz.
12 dB
10% RMS/Burst
1/4 symbol
Offset
25
50
75
Offset
37.5
62.5
87.5
-45 dBc
100 - 250 kHz
250 - 500 kHz
500 - 2500 kHz
6802800U74-AD | September 2014 |
Technical Specifications | 363
-85 dBc
-90 dBc
-100 dBc
Limit
-55
-65
-67
Limit
-55
-63
-65
-70 dBc
-80 dBc
-80 dBc
Table continued...
Send Feedback
Exhibit D2