Figure 209: Mts Lite Esd Strap Connection - Motorola DIMETRA MTS 4 Installation, Configuration, And Service Manual

Applicant: Motorola Solutions
420 | Static Precautions and ESD Strap
ESD wrist strap use is critical in the following cases:
• Replacement of any module inside a box, which includes service of any modules in a base radio.
• Service of receiver multicoupler (RMC).

Figure 209: MTS LiTE ESD Strap Connection

Send Feedback | September 2014 | 6802800U74-AD
Caution:
The RMC is a relatively open mechanical design and ESD protection is critical when servicing this
module. In case of field repair, first connect the cable to the Duplexer or Preselector, then connect to the
RMC. NEVER do this the other way round.
NEVER connect or disconnect the cable that connects the Duplexer and Preselector RX outputs to the
inputs of the RMC without using a correctly earthed ESD wrist strap.
Equipment Type: ABZ89FC5827 / 109AB-5827
Exhibit D2