Siemens RUGGEDCOM RX5000 Installation Manual page 10

Chapter 1
Introduction
Alarm Indicator LED
Lamp Test/Alarm Cut-Off (LT/ACO) Button
Management Port
Utility USB Port
Compact Flash Card Port
RS232 Serial Console Port
4
The alarm indicator LED illuminates when an alarm condition exists.
This button performs two functions:
• Press and hold this button to test all indicator LEDs
• Press and release this button to acknowledge an active alarm
This 10/100Base-T Ethernet port is used for system management that is out-of-band from
the switch fabric.
The USB port can be used to upgrade the ROX II software or install files, such as
configuration files and featurekey files.
This port houses the 1 GB compact flash card which contains active and backup
installations of ROX II, along with the configuration database and other system data.
This port is for interfacing directly with the device and accessing initial management
functions.
RUGGEDCOM RX5000
Installation Guide
Ports, Controls and Indicator LEDs