Panasonic KX-TD500 Programming Manual page 8

Configuration
Parameter
Default
Value Range
Description/Function
8
Card Type
Blank
Please refer to "Description/Function."
Specifies the type of service cards inserted in the free slots in the
basic and expansion shelves.
<Selection>
None: Not assigned.
AGC: Automatic Gain Control card
BRI: ISDN Basic Rate Access Interface card
DHLC: Digital Hybrid Line Circuit card
DID: Direct Inward Dialling Trunk card
DID-2W: Both-way Direct Inward Dialling Trunk card
DID-MFC: Direct Inward Dialling Trunk with MFC card
DISA: Direct Inward System Access card
DLC: Digital Proprietary Line Circuit card
DPH: Doorphone Circuit card
DPHG: Doorphone Circuit card
E1: E1 Digital Trunk card
E&M: E&M card (TIE Line card)
ELCOT: Enhanced Loop Start Central Office Trunk card
ERMT: Enhanced Remote Circuit card
ESLC: Enlarged Single Line Telephone Circuit with Message
Waiting card
GCOT: Ground Start Central Office Trunk card
HLC: Hybrid Line Circuit card
LCOT: Loop Start Central Office Trunk card
OPX: Off Premise Extension card
PCOT: Loop Start Central Office Trunk with Pay Tone
Detection card
PLC: Proprietary Line Circuit card
PRI30: ISDN Primary Rate Access Interface card
PRI23: ISDN Primary Rate Access Interface card
RCOT: Loop Start Central Office Trunk with Polarity
Reversal Detection card
RMT: Remote Circuit card
SLC: Single Line Telephone Circuit card
SLC-M: Single Line Telephone Circuit with Message Waiting
card
T1: T1 Digital Trunk card
Programming Guide