[Serial Interface Port] Prog – Word Length; [Serial Interface Port] Prog – Stop Bit; [Serial Interface Port] Prog – Baud Rate; [Serial Interface Port] Smdr (Port 2) - Panasonic KX-TD500 Programming Manual

Parameter
Default
Value Range
Description/Function
Reference
Parameter
Default
Value Range
Description/Function
Reference
Parameter
Default
Value Range
Description/Function
Reference

[Serial Interface Port] SMDR (Port 2)

Please refer to "Station Message Detail Recording (SMDR)" of Section "1.3 System Features"
in the Features Guide.
Note
• Generally speaking, you should connect your Programming PC to Port 1 and your
SMDR printer to Port 2.
Programming Guide
[Serial Interface Port] PROG – Word Length
(Display only)
8 bits
Defines the number of bits in each byte or character.
Note
• Port 1 is fixed to 8 bits.
None
[Serial Interface Port] PROG – Stop Bit
(Display only)
1 bit
A stop bit code indicates the end of a bit string which composes a
character. Select an appropriate value depending on the
requirements of your printer or personal computer.
Note
• Port 1 is fixed to 1 bit.
None
[Serial Interface Port] PROG – Baud Rate
19200 bps
1.
2400 bps
2.
4800 bps
3.
9600 bps
4.
19200 bps
Specifies the data transmission speed from the system to the printer
or personal computer.
None
Maintenance
331