Panasonic KX-TD500 Programming Manual page 153

3. Select the Incoming Group parameters to copy in "Copy Item" field.
• Only parameters which are available to copy are shown in "Copy Item" field.
This depends on the Group Type assignment of the copy source Incoming Group.
• Items marked with " " are copied.
4. Point to
• All displayed Incoming Group Nos. will be marked with " ."
• You can also specify one or several Incoming Groups as the copy destination by clicking
it (them) directly.
5. Point to
• "Are you sure?" is displayed.
6. Point to
• "Copying" is displayed while the source data is being copied to the destination.
• Parameters of the destination Incoming Groups are immediately effective when copying
is finished.
Parameter
Default
Value Range
Description/Function
Reference
Parameter
Default
Value Range
Description/Function
Reference
Programming Guide
in the "Destination Incoming Group" field and click.
and click.
and click.
Group No.
1
1-96
Specifies the Incoming Group (1-96) which you are going to
programme.
• 1.3 System Features (F/G)
– Incoming Group
Copy
—
—
You can enter into "Incoming Group Copy" screen by clicking this
button.
—
Group
153