Print Out Caller Id Information; Print Out Ddi / Did Information; Print Incoming Call Start "Rc"/Incoming Call Answer "An" Information - Panasonic KX-TD500 Programming Manual

Parameter
Default
Value Range
Description/Function
Reference
Parameter
Default
Value Range
Description/Function
Reference
Parameter
Default
Value Range
Description/Function
Reference
Programming Guide

Print out Caller ID Information

Number
1.
Number
2.
Number + Name
3.
Name
4.
Disable
SMDR can print out Caller ID information. This setting specifies
whether priority is given to Caller ID Name or to Caller ID
Number. However, SMDR can print out both when "Type-D" is
specified as Output Type. SMDR can print out both Caller ID and
DDI / DID information simultaneously when "Type-E" is specified
as Output Type.
• 1.3 System Features (F/G)
– Station Message Detail Recording (SMDR)
• 1.5 Attended Features (F/G)
– Caller ID Service

Print out DDI / DID Information

Disable
1.
Number
2.
Number + Name
3.
Name
4.
Disable
Activates or deactivates printing out the DDI / DID subscriber
number received from the Central Office.
• 1.5 Attended Features (F/G)
– Direct Inward Dialling (DID)
• 2.4 ISDN Attended Features (F/G)
– Direct Dialling In (DDI)
Print out Incoming Call Start "RC" and Incoming Call Answer
"AN" information
Disable
1.
Enable
2.
Disable
Enables or disables the SMDR printout for RC (when an incoming
call occurs) and AN (when an incoming call is answered).
• 1.3 System Features (F/G)
– Station Message Detail Recording (SMDR)
Maintenance
321