Panasonic KX-TD500 Programming Manual page 27

Parameter
Default
Value Range
Description/Function
Reference
Parameter
Default
Value Range
Description/Function
Reference
Parameter
Default
Value Range
Description/Function
Reference
Programming Guide
Group No.
Blank
1-48 or 1-128
Channel Type : LCO, GCO, DID, TIE (E&M)
Specifies the Trunk Group (1-48) to which the T1 port is assigned.
Channel Type : OPX
Specifies the Extension Group (1-128) to which the T1 port is
assigned.
• 1.3 System Features (F/G)
– Extension Group
– Trunk Group
• 3.2 Trunk Group (P/G)
• 3.3 Extension Group (P/G)
Status
—
1.
INS
2.
OUS
3.
FAULT
Specifies the operating status of the T1 port.
1.
INS: The T1 port is In-Service.
2.
OUS: The T1 port is Out-of-Service.
3.
FAULT: The T1 port is defective (hardware). In this case, the
LED indicator on the T1 card will light.
None
DN Refer
—
—
Displays the list of DNs/FDNs which are already assigned to the
extensions / system resources.
None
Configuration
27