Data Logger; Breaker Maintenance - GE t60 Instruction Manual

6 ACTUAL VALUES
PATH: ACTUAL VALUES RECORDS

DATA LOGGER

MESSAGE
The represents the time at which the oldest available samples were taken. It will be static until the log
OLDEST SAMPLE TIME
gets full, at which time it will start counting at the defined sampling rate. The
most recent samples were taken. It counts up at the defined sampling rate. If the data logger channels are defined, then
both values are static.
Refer to the
COMMANDS CLEAR RECORDS
PATH: ACTUAL VALUES RECORDS
BREAKER 1
MESSAGE
MESSAGE
MESSAGE
MESSAGE
MESSAGE
MESSAGE
There is an identical menu for each of the breakers. The
COMMANDS CLEAR RECORDS
defined as the slowest operating time of breaker poles that were initiated to open.
GE Multilin
DATA LOGGER
OLDEST SAMPLE TIME:
2000/01/14 13:45:51
NEWEST SAMPLE TIME:
2000/01/14 15:21:19
menu for clearing data logger records.
MAINTENANCE BREAKER 1(4)
BKR 1 ARCING AMP φA:
0.00 kA2-cyc
BKR 1 ARCING AMP φB:
0.00 kA2-cyc
BKR 1 ARCING AMP φC:
0.00 kA2-cyc
BKR 1 OPERATING TIME
φA:
0 ms
BKR 1 OPERATING TIME
φB:
0 ms
BKR 1 OPERATING TIME
φC:
0 ms
BKR 1 OPERATING
TIME: 0 ms
BKR 1 ARCING AMP
menu for clearing breaker arcing current records. The
T60 Transformer Protection System
6.4 RECORDS
6.4.4 DATA LOGGER
represents the time the
NEWEST SAMPLE TIME

6.4.5 BREAKER MAINTENANCE

2
values are in units of kA -cycles. Refer to the
BREAKER OPERATING TIME
6
is
6-23