Dell DR4000 Administrator's Manual page 98

FILE LOCATION: C:\Users\bruce_wylie\Documents\~Dell
Docs\~FINAL_DR4000_1.0.1.1_DOCS\~Final_1.0.1.1_DR4000_Admin_Guide_Files\~3-
Table 8-1. DR4000 System Alert Messages
Alert Message
NVRAM does not match the data
volume.
Storage usage approaching system
capacity.
Replication resync cannot proceed. Namespace limit has reached its maximum.
Out of space on replication target. Clean up the filesystem.
The filesystem has reached the
maximum allowable limit for files
and directories. Creating new files
and directories will be denied.
System Chassis Alerts
number
Power Supply <
detected a failure.
D E L L C O N F I D E N T I A L – P R E L I M I N A R Y 4 / 5 / 1 2 - F O R P R O O F O N LY
90
Troubleshooting and Maintenance
Description/Meaning or Action
If this is a newly replaced NVRAM, use
maintenance
--hardware --reinit_nvram commands to
reinitialize the NVRAM.
For more information, see the
System Command Line Reference Guide
Clean up the filesystem.
Clean up the filesystem.
> • Reconnect the power cable to the power supply
unit if it is disconnected.
• Ensure there is input AC power at the power
cable.
• Try using a different power cord.
If this does not resolve the issue, replace the
power supply.
Dell DR4000
.