Dell DR4000 Administrator's Manual page 103

FILE LOCATION: C:\Users\bruce_wylie\Documents\~Dell
Docs\~FINAL_DR4000_1.0.1.1_DOCS\~Final_1.0.1.1_DR4000_Admin_Guide_Files\~3-
Table 8-1. DR4000 System Alert Messages
Alert Message
System Chassis Alerts
number
Virtual Disk <
number
Virtual Disk <
invalid layout.
device
< > failed.
device
< > is missing.
device
Storage < > has failed.
device
Storage < > is missing.
D E L L C O N F I D E N T I A L – P R E L I M I N A R Y 4 / 5 / 1 2 - F O R P R O O F O N LY
Description/Meaning or Action
> failed. • Replace any failed or missing physical disk(s)
and run the Dell Restore Manager (RM) utility.
> has an • Run the Dell Restore Manager (RM) utility to
repair this installation.
• Verify that the device is present, and then
check the cables. For more information, see the
Dell DR4000 System Owner's Manual
the system cabling.
• Check the connection to the controller battery
and the status of battery health.
• If none of these steps resolve the problem,
replace the storage controller battery.
• Verify that the device is present, and then
check the cabling. For more information, see
Dell DR4000 System Owner's Manual
the
verify the system cabling.
• Check the connection to the controller battery
and the status of battery health.
NOTE:
A battery with a weak or depleted charge can
cause this warning.
• Check cable connections between the storage
controller and the enclosure or backplane.
Perform the following:
• Check SAS and power cable connections
between the storage controller and the
enclosure or backplane.
• Check the external enclosure EMM and PERC
status LEDs.
Troubleshooting and Maintenance
to verify
to
95