Dell DR4000 Administrator's Manual page 25

FILE LOCATION: C:\Users\bruce_wylie\Documents\~Dell
Docs\~FINAL_DR4000_1.0.1.1_DOCS\~Final_1.0.1.1_DR4000_Admin_Guide_Files\~3-
NOTE:
When you select static IP addressing, you are prompted to type the
static IP address (for example, you could use the default IP, 10.77.88.99) for the
system, and press <Enter>. If your network supports the use of DHCP, type yes
at the DHCP prompt, press <Enter>, and respond to any prompts.
6 To configure a subnet mask address, type the subnet mask address you
want to use (for example, you could use the default subnet mask address,
255.0.0.0), and press <Enter>.
7 To configure a default gateway address, type the default gateway address
you want to use (for example, 10.10.20.10), and press <Enter>.
8 To configure a DNS Suffix, type the DNS suffix you want to use (for
example, storage.local), and press <Enter>.
9 To configure a primary DNS server IP address, type an IP address you want
to use for the primary DNS server (for example, 10.10.10.10), and press
<Enter>.
10 (Optional) To configure a secondary DNS server IP address, type
yes), and press <Enter>.
If you responded yes, type an IP address you want to use for the secondary
DNS server (for example, 10.10.10.11), and press <Enter>.
11 To change the default host name (for example, the serial number of the
DR4000 hardware appliance), type
If you responded yes, type the host name you want to use, and press
<Enter>. If you did not want to change the default host name, type
for no) and press <Enter>.
(
After you configure your host name response, the current system settings
are displayed.
12 To accept these settings, type
13 If you want to change any of these settings, type
<Enter>. Modify any settings as needed, and press <Enter>.
When completed, a successful initialization message is displayed.
14 At the prompt, type exit and press <Enter> to end the DR4000 system
CLI session.
You are now ready to log in to the system using the DR4000 system GUI.
D E L L C O N F I D E N T I A L – P R E L I M I N A R Y 4 / 5 / 1 2 - F O R P R O O F O N LY
yes) and press <Enter>.
y (for
(for yes), and press <Enter>.
y
n
Setting Up the DR4000 System
for
y (
n
(for no), and press
17