FILE LOCATION: C:\Users\bruce_wylie\Documents\~Dell
Docs\~FINAL_DR4000_1.0.1.1_DOCS\~Final_1.0.1.1_DR4000_Admin_Guide_Files\~3-
Usage
The Usage page consists of:
•
Range and Display—this displays system usage details for Latest Range
or Time Range.
–
To view the latest range, select Latest Range, enter an appropriate
value in Display last..., select the appropriate Hours/Days/Months
duration, and click Apply.
To view the time range, select Time Range, type the required start/end
–
date and time in Start Date and End Date (or select Set "End Date"
to current time), and click Apply.
•
System Usage—You can display system usage based on the Latest Time
or Time Range values you defined. You can view system usage details for
the following interface tabs:
–
CPU Load
–
System
–
Memory
–
Active Processes
–
Protocols
–
Network
–
Disk
–
All
NOTE:
If you click All, this action displays the system usage that is defined by the
range and display options you select, and the file system protocols you have
configured. To view all of the displayed usage categories, use the scroll bar on the
right side of the page.
The All tab can display the following system status categories (depending
upon your file system protocol configuration):
•
CPU Load
•
System Usage
•
Memory Usage - Total
•
Memory Usage - Real
•
Active Processes - Total
D E L L C O N F I D E N T I A L – P R E L I M I N A R Y 4 / 5 / 1 2 - F O R P R O O F O N LY
Setting Up the DR4000 System
23