Related Manuals for Sigma 2-16P
Summary of Contents for Sigma 2-16P
- Page 1 Translation from the original operating manual 04/2007 Rev. 2.15 of 15/09/2017 Sigma 2-16P; ; part no. 0700602 Sigma 2-16P from serial no. 120756 Laboratory Centrifuge Operating Manual Please retain for later use!
- Page 2 Laboratory Centrifuge Sigma 2-16P Version 04/2007, Rev. 2.15 of 15/09/2017 • sb 2 / 72 Translation from the original operating manual, part no. 0700602...
- Page 3 Laboratory Centrifuge Sigma 2-16P In case of inquiries, please state the following numbers: Order number: Serial number: © Copyright by Sigma Laborzentrifugen GmbH An der Unteren Söse 50 37520 Osterode am Harz Germany Tel.: +49 (0) 5522 / 5007-0 Fax: +49 (0) 5522 / 5007-12 Web: www.sigma-zentrifugen.de...
- Page 4 Laboratory Centrifuge Sigma 2-16P Version 04/2007, Rev. 2.15 of 15/09/2017 • sb 4 / 72 Translation from the original operating manual, part no. 0700602...
-
Page 5: Table Of Contents
Laboratory Centrifuge Sigma 2-16P Table of contents General information ......................9 Importance of the operating manual .................. 9 Intended use ........................9 Warranty and liability......................9 Copyright ........................10 Standards and regulations ....................10 Scope of supply ......................10 Layout and mode of operation ..................11 Layout of the centrifuge .................... - Page 6 Laboratory Centrifuge Sigma 2-16P Table of contents Storage and transport ....................... 24 Dimensions and weight ....................24 Storage conditions ......................24 Notes on transport ......................24 Packaging ........................25 Transport safety device ....................25 Set-up and connection ...................... 26 Installation site ........................ 26 Power supply ........................
- Page 7 Laboratory Centrifuge Sigma 2-16P Table of contents Malfunctions and error correction ..................40 General malfunctions ...................... 40 7.1.1 Emergency lid release ....................41 Table of error codes ......................42 Service contact ....................... 43 Maintenance and service ....................44 Maintenance ........................44 8.1.1...
- Page 8 Laboratory Centrifuge Sigma 2-16P Table of contents Version 04/2007, Rev. 2.15 of 15/09/2017 • sb 8 / 72 Translation from the original operating manual, part no. 0700602...
-
Page 9: General Information
General information Pos : 2 /100 Sigma/100 BA Z entrifug en Sig ma ( Standardmodule) /010 Allgemeine Infor mationen/010- 0010 Stell enwert der Betriebs anl eitung------------------------------------------------------- @ 26\mod_1405318949962_68.doc x @ 191694 @ 2 @ 1 Importance of the operating manual... -
Page 10: Copyright
Laboratory Centrifuge Sigma 2-16P 1 General information Pos : 8 /100 Sigma/100 BA Z entrifug en Sig ma ( Standardmodule) /010 Allgemeine Infor mationen/010- 0040 Urheberrec ht----------------------------------------------------------------- @ 26\mod_1405318956858_68.doc x @ 191751 @ 2 @ 1 Copyright The copyright concerning the operating manual remains with Sigma Laborzentrifugen GmbH. -
Page 11: Layout And Mode Of Operation
Layout of the centrifuge Pos : 17 /100 Sigma/110 BA Zentrifugen Sigma (Pr ojekte) /2- 16P/020 Aufbau und Wir kungs weise/020-0010-0010 Funkti ons- und Bedienelemente 2- 16P @ 29\mod_1405321495781_68.doc x @ 196889 @ 3 @ 1 2.1.1 Functional and operating elements 1... -
Page 12: Name Plate
Laboratory Centrifuge Sigma 2-16P 2 Layout and mode of operation Pos : 19 /100 Sigma/110 BA Zentrifugen Sigma (Pr ojekte) /2- 16P/020 Aufbau und Wir kungs weise/020-0010-0020 T ypensc hild 2-16P @ 29\mod_1405321496634_68.doc x @ 196903 @ 3 @ 1 2.1.2 Name plate 1... -
Page 13: Mode Of Operation
Pos : 21 /100 Sigma/100 BA Zentrifugen Sigma (Standar dmodule)/020 Aufbau und Wir kungs weise/020-0020 Wirkungs weis e---------------------------------------------------------- @ 26\mod_1405318984194_68.doc x @ 191807 @ 2 @ 1 Mode of operation Pos : 22 /100 Sigma/100 BA Zentrifugen Sigma (Standar d module)/020 Aufbau und Wir kungs weise/020-0020-0010 Prinzi p der Z entrifugati on @ 26\mod_1405318985448_68.doc x @ 191821 @ 3 @ 1 2.2.1... -
Page 14: Speed, Radius, And Relative Centrifugal Force
2 Layout and mode of operation Pos : 26 /100 Sigma/100 BA Zentrifugen Sigma (Standar dmodule)/020 Aufbau und Wir kungs weise/020-0020-0020- 0010 Dr ehzahl, R adius , R elati ve Zentrifugalbesc hl eunigung @ 26\mod_1405318988082_68.doc x @ 191849 @ 4 @ 1 ... -
Page 15: Safety
Pos : 31 /100 Sigma/100 BA Zentrifugen Sigma (Standar dmodule)/030 Sic her heit/030 Sic her hei t======================================= @ 26\mod_1405319007254_68.doc x @ 191877 @ 1 @ 1 Safety Pos : 32 /100 Sigma/100 BA Zentrifugen Sigma (Standar dmodule)/030 Sic her heit/030-0010 Besc hilderung des Geräts ( auß er 3-30KS) @ 30\mod_1405404002477_68.doc x @ 203921 @ 2 @ 1 Marking of the unit... -
Page 16: Explanation Of The Symbols And Notes
Leerz eile @ 0\mod_1202116244500_0.doc x @ 114 @ @ 1 Pos : 35 /100 Sigma/100 BA Zentrifugen Sigma (Standar dmodule)/030 Sic her heit/030-0020 Symbol- und Hi nweis er klär ung en @ 26\mod_1405319013955_68.doc x @ 191947 @ 2 @ 1 ... -
Page 17: Responsibility Of The Operator
Laboratory Centrifuge Sigma 2-16P 3 Safety Pos : 37 /100 Sigma/100 BA Zentrifugen Sigma (Standar dmodule)/030 Sic her heit/030-0030 Ver antwortung des Betrei bers @ 26\mod_1405319015364_68.doc x @ 191961 @ 2 @ 1 Responsibility of the operator The operator is responsible for authorising only qualified personnel to work on the centrifuge (see chapter 3.4 - "Operating personnel"). -
Page 18: Safety Instructions
Leerz eile @ 0\mod_1202116244500_0.doc x @ 114 @ @ 1 Pos : 46 /100 Sigma/100 BA Zentrifugen Sigma (Standar dmodule)/030 Sic her heit/030-0060-0020 M ec hanisc he Sic her heit (auß er 1-16/1-16K) @ 26\mod_1405319024314_68.doc x @ 192059 @ 3 @ 1 ... -
Page 19: Fire Prevention
Leerz eile @ 0\mod_1202116244500_0.doc x @ 114 @ @ 1 Pos : 50 /100 Sigma/100 BA Zentrifugen Sigma (Standar dmodule)/030 Sic her heit/030-0060-0040 C hemis che und bi ologisc he Sic her hei t @ 26\mod_1405319028141_68.doc x @ 192101 @ 3 @ 1 ... -
Page 20: Safety Instructions For Centrifugation
Laboratory Centrifuge Sigma 2-16P 3 Safety Pos : 52 /100 Sigma/100 BA Zentrifugen Sigma (Standar dmodule)/030 Sic her heit/030-0060-0050 Sicherheits hi nweis e z ur Z entrifug ation @ 26\mod_1405319029632_68.doc x @ 192115 @ 3 @ 1 3.6.5 Safety instructions for centrifugation For safe operation, observe the following before starting the centrifuge: •... -
Page 21: Safety Of Rotors And Accessories
Laboratory Centrifuge Sigma 2-16P 3 Safety Pos : 56 /100 Sigma/100 BA Zentrifugen Sigma (Standar dmodule)/030 Sic her heit/030-0060-0070 Sicherheit von R otoren und Zubehör @ 44\mod_1470119200568_68.doc x @ 437008 @ 3 @ 1 3.6.7 Safety of rotors and accessories Pos : 57 /100 Sigma/100 BA Zentrifugen Sigma (Standar dmodule)/030 Sic her heit/030-0060-0070- 0010 Lebens dauer @ 26\mod_1405319032612_68.doc x @ 192143 @ 4 @ 1... -
Page 22: Safety Devices
Leerz eile @ 0\mod_1202116244500_0.doc x @ 114 @ @ 1 Pos : 68 /100 Sigma/100 BA Zentrifugen Sigma (Standar dmodule)/030 Sic her heit/030-0070-0051 U nwuchtüberwac hung Spi ncontr ol L+Eas y+U ni vers al @ 27\mod_1405319047031_68.doc x @ 192283 @ 3 @ 1 ... -
Page 23: Measures In The Event Of Hazards And Accidents
Laboratory Centrifuge Sigma 2-16P 3 Safety Pos : 70 /100 Sigma/100 BA Zentrifugen Sigma (Standar dmodule)/030 Sic her heit/030-0080 Ver halten bei Gefahren und Unfäll en @ 27\mod_1405319051188_68.doc x @ 192325 @ 2 @ 1 Measures in the event of hazards and accidents •... -
Page 24: Storage And Transport
Storage and transport Pos : 76 /100 Sigma/110 BA Zentrifugen Sigma (Pr ojekte) /2- 16P/040 Lagerung und Tr ans port/040-0010 Abmess ungen und Gewic ht 2- 16P @ 29\mod_1405321505934_68.doc x @ 196917 @ 2 @ 1 Dimensions and weight... -
Page 25: Packaging
Leerz eile @ 0\mod_1202116244500_0.doc x @ 114 @ @ 1 Pos : 84 /100 Sigma/110 BA Zentrifugen Sigma (Pr ojekte) /2- 16P/040 Lagerung und Tr ans port/040-0050 Tr ansportsic her ung 2-16P - Ü bersc hrift @ 29\mod_1405321508222_68.doc x @ 196959 @ 2 @ 1 Transport safety device Pos : 85 /100 Sigma/110 BA Zentrifugen Sigma (Pr ojekte) /2- 16P/040 Lagerung und Tr ans port/040-0051 Tr ansportsic her ung 2-16P - T ext @ 36\mod_1434605323998_68.doc x @ 263872 @ @ 1... -
Page 26: Set-Up And Connection
Pos : 91 /100 Sigma/100 BA Zentrifugen Sigma (Standar dmodule)/050 Aufstellung und Ans chl uss/050- 0020 Energievers orgung------------------------------------------------------ @ 27\mod_1405319175630_68.doc x @ 192409 @ 2 @ 1 Power supply Pos : 92 /100 Sigma/100 BA Zentrifugen Sigma (Standar dmodule)/050 Aufstellung und Ans chl uss/050- 0020-0010 Ansc hl uss art (Kaltger ätestec ker) @ 32\mod_1417599670621_68.doc x @ 222346 @ 3 @ 1 5.2.1 Type of connection... -
Page 27: Using The Centrifuge
Pos : 97 /100 Sigma/100 BA Zentrifugen Sigma (Standar dmodule)/062 Betrieb_Spinc ontrol Eas y+Uni vers al/062 Betrieb============ ============================= @ 27\mod_1405320417154_68.doc x @ 194019 @ 1 @ 1 Using the centrifuge Pos : 98 /100 Sigma/100 BA Zentrifugen Sigma (Standar dmodule)/062 Betrieb_Spinc ontrol Eas y+Uni vers al/062-0010 Erste Inbetri ebnahme @ 27\mod_1405320417875_68.doc x @ 194033 @ 2 @ 1 Initial start-up •... -
Page 28: Installation Of Rotors And Accessories
6.2.2 Installation of rotors and accessories Pos : 105 /100 Sig ma/110 BA Z entrifugen Sig ma (Proj ekte)/2-16P/062 Betri eb/062-0020-0020- 0010 Ei nsetzen des R otors 2-16P @ 29\mod_1405321530898_68.doc x @ 197001 @ 4 @ 1 6.2.2.1 Installation of the rotor •... -
Page 29: Installation Of Angle Rotors With A Hermetically Sealed Lid
Pos : 107 /100 Sig ma/110 BA Z entrifugen Sig ma (Proj ekte)/2-16P/062 Betri eb/062-0020-0020- 0020 Ei nsetzen von Wi nkelr otoren mit hermetisc h versc hließ barem D ec kel 2-16P @ 29\mod_1405321531516_68.doc... -
Page 30: Installation Of The Microhaematocrit Rotor
Laboratory Centrifuge Sigma 2-16P 6 Using the centrifuge Pos : 109 /100 Sig ma/110 BA Z entrifugen Sig ma (Proj ekte)/2-16P/062 Betri eb/062-0020-0020- 0021 Ei nsetzen des Mi kr ohämatokrittell ers 2-16P @ 29\mod_1405321532319_68.doc x @ 197029 @ 4 @ 1 6.2.2.3 Installation of the microhaematocrit rotor •... -
Page 31: Installation Of Accessories
6 Using the centrifuge Pos : 111 /100 Sig ma/100 BA Z entrifugen Sig ma (Standardmodul e)/060 Betrieb_Spi nc ontr ol L+S/060- 0020-0020-0030 Eins etzen von Z ubehör 4plätzig bis 2-16P bis 3- 18KS @ 27\mod_1405319205710_68.doc x @ 192507 @ 4 @ 1 ... -
Page 32: Adapters
Laboratory Centrifuge Sigma 2-16P 6 Using the centrifuge Pos : 113 /100 Sig ma/100 BA Z entrifugen Sig ma (Standardmodul e)/062 Betrieb_Spi nc ontr ol Eas y+U ni versal/062- 0020-0020-0040 Adapter @ 28\mod_1405320421969_68.doc x @ 194103 @ 4 @ 1 ... -
Page 33: Control System "Spincontrol Universal
Laboratory Centrifuge Sigma 2-16P 6 Using the centrifuge Pos : 117 /100 Sig ma/100 BA Z entrifugen Sig ma (Standardmodul e)/062 Betrieb_Spi nc ontr ol Eas y+U ni versal/Spinc ontrol Uni versal /062- 0030 Spincontr ol Uni vers al Steuerung---------------------------------------------- @ 28\mod_1405320525161_68.doc x @ 194411 @ 2 @ 1 ... -
Page 34: Manual Mode
Laboratory Centrifuge Sigma 2-16P 6 Using the centrifuge Pos : 120 /100 Sig ma/100 BA Z entrifugen Sig ma (Standardmodul e)/062 Betrieb_Spi nc ontr ol Eas y+U ni versal/Spinc ontrol Uni versal /062- 0030-0020 M anueller Betri eb @ 28\mod_1405320526938_68.doc x @ 194439 @ 3 @ 1 ... - Page 35 Laboratory Centrifuge Sigma 2-16P 6 Using the centrifuge Continuous run During the continuous run, the runtime of the centrifuge is unlimited and must be stopped manually. The centrifuge accelerates during the continuous run until the set speed is reached. •...
-
Page 36: Speed
Laboratory Centrifuge Sigma 2-16P 6 Using the centrifuge Pos : 131 /100 Sig ma/100 BA Z entrifugen Sig ma (Standardmodul e)/062 Betrieb_Spi nc ontr ol Eas y+U ni versal/Spinc ontrol Uni versal /062- 0030-0020-0060 Dr ehzahl - ohne T emp @ 28\mod_1405320532488_68.doc x @ 194523 @ 4 @ 1 ... -
Page 37: Rotor Selection
Laboratory Centrifuge Sigma 2-16P 6 Using the centrifuge Pos : 135 /100 Sig ma/100 BA Z entrifugen Sig ma (Standardmodul e)/062 Betrieb_Spi nc ontr ol Eas y+U ni versal/Spinc ontrol Uni versal /062- 0030-0020-0080 R otoraus wahl - ohne Temp @ 28\mod_1405320534301_68.doc x @ 194551 @ 4 @ 1 ... -
Page 38: Automatic Lid Opening Function ("Auto-Lid-Open")
Laboratory Centrifuge Sigma 2-16P 6 Using the centrifuge Pos : 139 /100 Sig ma/100 BA Z entrifugen Sig ma (Standardmodul e)/062 Betrieb_Spi nc ontr ol Eas y+U ni versal/Spinc ontrol Uni versal /062- 0030-0020-0100 Automatis che D ec kelöffnung - ohne Temp @ 28\mod_1405320536098_68.doc x @ 194579 @ 4 @ 1 ... -
Page 39: Programs
Laboratory Centrifuge Sigma 2-16P 6 Using the centrifuge Pos : 145 /100 Sig ma/100 BA Z entrifugen Sig ma (Standardmodul e)/062 Betrieb_Spi nc ontr ol Eas y+U ni versal/Spinc ontrol Uni versal /062- 0030-0030 Programm @ 28\mod_1405320538821_68.doc x @ 194621 @ 3 @ 1 6.3.3... -
Page 40: Malfunctions And Error Correction
Laboratory Centrifuge Sigma 2-16P 7 Malfunctions and error correction Pos : 153 /010 Uni vers almodul e/Seitenwechs el @ 0\mod_1202116244312_0.doc x @ 105 @ @ 1 Pos : 154 /100 Sig ma/100 BA Z entrifugen Sig ma (Standardmodul e)/070 Störungen und F ehl ersuche/070 Störungen und F ehl ersuche============================= @ 28\mod_1405320576072_68.doc x @ 194663 @ 1 @ 1 ... -
Page 41: Emergency Lid Release
Laboratory Centrifuge Sigma 2-16P 7 Malfunctions and error correction Pos : 157 /100 Sig ma/110 BA Z entrifugen Sig ma (Proj ekte)/2-16P/070 Stör ungen und F ehl ersuche/070-0010- 0010 N otentriegel ung 2-16P @ 29\mod_1405321542103_68.doc x @ 197043 @ 3 @ 1 7.1.1... -
Page 42: Table Of Error Codes
Laboratory Centrifuge Sigma 2-16P 7 Malfunctions and error correction Pos : 159 /100 Sig ma/100 BA Z entrifugen Sig ma (Standardmodul e)/070 Störungen und F ehl ersuche/070-0020 T abell e der F ehler meldung en @ 28\mod_1405320582996_68.doc x @ 194761 @ 2 @ 1 ... -
Page 43: Service Contact
Laboratory Centrifuge Sigma 2-16P 7 Malfunctions and error correction Pos : 161 /100 Sig ma/100 BA Z entrifugen Sig ma (Standardmodul e)/070 Störungen und F ehl ersuche/070-0030 Kontakt i m Ser vic efall @ 28\mod_1405320584361_68.doc x @ 194775 @ 2 @ 1 ... -
Page 44: Maintenance And Service
Laboratory Centrifuge Sigma 2-16P 8 Maintenance and service Pos : 164 /100 Sig ma/100 BA Z entrifugen Sig ma (Standardmodul e)/080 War tung und Instandhaltung/080 Wartung und Instandhaltung ========================= @ 28\mod_1405320612731_68.doc x @ 194789 @ 1 @ 1 Maintenance and service The centrifuge, rotor, and accessories are subject to high mechanical stress. -
Page 45: Accessories
Laboratory Centrifuge Sigma 2-16P 8 Maintenance and service Pos : 169 /100 Sig ma/100 BA Z entrifugen Sig ma (Standardmodul e)/080 War tung und Instandhaltung/080-0010- 0020 Zubehör (auß er 8K) @ 28\mod_1405320618247_68.doc x @ 194845 @ 3 @ 1 ... -
Page 46: Rotors, Buckets And Carriers
Leerz eile @ 0\mod_1202116244500_0.doc x @ 114 @ @ 1 Pos : 175 /100 Sig ma/110 BA Z entrifugen Sig ma (Proj ekte)/2-16P/080 War tung und Instandhaltung/080-0010- 0030-0010 Mi kr ohämatokritteller 2-16P @ 29\mod_1405321549785_68.doc x @ 197057 @ 3 @ 1 ... -
Page 47: Glass Breakage
Laboratory Centrifuge Sigma 2-16P 8 Maintenance and service Pos : 179 /100 Sig ma/100 BA Z entrifugen Sig ma (Standardmodul e)/080 War tung und Instandhaltung/080-0010- 0060 Glasbr uch @ 28\mod_1405320623434_68.doc x @ 194901 @ 3 @ 1 8.1.6 Glass breakage In the case of glass breakage, immediately remove all glass particles (e.g. -
Page 48: 8.2.1 Autoclaving
Laboratory Centrifuge Sigma 2-16P 8 Maintenance and service Pos : 183 /100 Sig ma/100 BA Z entrifugen Sig ma (Standardmodul e)/080 War tung und Instandhaltung/080-0020- 0010 Autoklavi eren @ 28\mod_1405320627440_68.doc x @ 194943 @ 3 @ 1 8.2.1 Autoclaving The service life of the accessories essentially depends on the frequency of autoclaving and use. -
Page 49: Service
Laboratory Centrifuge Sigma 2-16P 8 Maintenance and service Pos : 185 /100 Sig ma/100 BA Z entrifugen Sig ma (Standardmodul e)/080 War tung und Instandhaltung/080-0030 Ins tandhaltungs arbeiten @ 28\mod_1405320628810_68.doc x @ 194957 @ 2 @ 1 Service In the event of service work that requires the removal of the panels, there is a risk of electric shock or mechanical injury. -
Page 50: Return Of Defective Parts
Laboratory Centrifuge Sigma 2-16P 8 Maintenance and service Pos : 187 /100 Sig ma/100 BA Z entrifugen Sig ma (Standardmodul e)/080 War tung und Instandhaltung/080-0040 R üc ks endung defekter T eile @ 28\mod_1405320630226_68.doc x @ 194971 @ 2 @ 1 ... - Page 51 NOTE The forms can be downloaded online from www.sigma-zentrifugen.de [Service] [Overhaul and repair]. Pos : 188 /010 Uni vers almodul e/Abs chnitts wec hs el @ 0\mod_1202124514062_0.doc x @ 418 @ @ 1 Pos : 189 /010 Uni vers almodul e/Seitenwechs el @ 0\mod_1202116244312_0.doc x @ 105 @ @ 1 Version 04/2007, Rev.
-
Page 52: Disposal
Pos : 191 /100 Sig ma/100 BA Z entrifugen Sig ma (Standardmodul e)/090 Entsorgung/090-0010 Entsorgung der Z entrifuge---------------------------------------------- @ 28\mod_1405320660029_68.doc x @ 194999 @ 2 @ 1 Disposal of the centrifuge In accordance with the directive 2002/96/EC, SIGMA centrifuges are marked with the symbol shown to the left. This symbol means that it is not permissible to dispose of the unit among household waste. -
Page 53: 10 Technical Data
Laboratory Centrifuge Sigma 2-16P 10 Technical data Pos : 196 /100 Sig ma/110 BA Z entrifugen Sig ma (Proj ekte)/2-16P/100 T echnisc he D aten/100 Technisc he Daten 2-16P============================== @ 29\mod_1405321556174_68.doc x @ 197071 @ 1 @ 1 10 Technical data... -
Page 54: Technical Documentation
Laboratory Centrifuge Sigma 2-16P 10 Technical data Pos : 201 /100 Sig ma/100 BA Z entrifugen Sig ma (Standardmodul e)/100 T ec hnisc he D aten/100- 0020 Technisc he Dokumentation @ 28\mod_1405320681369_68.doc x @ 195055 @ 2 @ 1 ... -
Page 55: 11 Appendix
Pos : 204 /100 Sig ma/100 BA Z entrifugen Sig ma (Standardmodul e)/110 Anhang/110 Anhang===================================== @ 28\mod_1405320699310_68.doc x @ 195069 @ 1 @ 1 11 Appendix Pos : 205 /100 Sig ma/110 BA Z entrifugen Sig ma (Proj ekte)/2-16P/110 Anhang/110-0010 Zubehörpr ogramm 2-16P @ 29\mod_1405321564657_68.doc x @ 197085 @ 2 @ 1 11.1 Range of accessories Part no. - Page 56 Laboratory Centrifuge Sigma 2-16P 11 Appendix Part no. Description Max. speed Max. (rpm) gravitational field (x g) 12148 Angle rotor 24 x 1.5/2.0 ml, for e.g. reaction vials no. 15008, 15040, incl. hermetic aluminium lid no. 17864 Radius max. 8.2 cm, radius min. 4.9 cm, angle 45°...
-
Page 57: 11.1.1 Maximum Speed For Tubes
Leerz eile @ 0\mod_1202116244500_0.doc x @ 114 @ @ 1 Pos : 208 /100 Sig ma/110 BA Z entrifugen Sig ma (Proj ekte)/2-16P/110 Anhang/110-0010- 0010 H öc hstdrehz ahl en von Gefäßen 2-16P @ 29\mod_1405321565378_68.doc x @ 197099 @ 3 @ 1 11.1.1 Maximum speed for tubes... -
Page 58: 11.1.2 Rotor Radii
Laboratory Centrifuge Sigma 2-16P 11 Appendix Pos : 210 /100 Sig ma/100 BA Z entrifugen Sig ma (Standardmodul e)/110 Anhang/110-0010- 0023 R adi en der R otoren ( WR+AR+Mi krohämatokritteller) @ 28\mod_1405320703631_68.doc x @ 195125 @ 3 @ 1 11.1.2 Rotor radii The information in the accessories table concerning the radius refers to the values of the respective rotor as shown below. -
Page 59: Speed-Gravitational-Field-Diagram
Laboratory Centrifuge Sigma 2-16P 11 Appendix Pos : 212 /100 Sig ma/100 BA Z entrifugen Sig ma (Standardmodul e)/110 Anhang/110-0020 Dr ehz ahl-Sc hwer efeld-Diagr amm @ 28\mod_1405320705642_68.doc x @ 195153 @ 2 @ 1 11.2 Speed-gravitational-field-diagram Fig. 24: Speed-gravitational-field-diagram Pos : 213 /010 Uni vers almodul e/Seitenwechs el @ 0\mod_1202116244312_0.doc x @ 105 @ @ 1... -
Page 60: Table Of The Service Life Of Rotors And Accessories
Laboratory Centrifuge Sigma 2-16P 11 Appendix Pos : 214 /100 Sig ma/100 BA Z entrifugen Sig ma (Standardmodul e)/110 Anhang/110-0040 T abell e: Lebensdauer von R otoren und Z ubehör @ 28\mod_1405320709911_68.doc x @ 195195 @ 2 @ 1 ... -
Page 61: Resistance Data
Laboratory Centrifuge Sigma 2-16P 11 Appendix Pos : 216 /100 Sig ma/100 BA Z entrifugen Sig ma (Standardmodul e)/110 Anhang/110-0050 Beständigkeits tabelle @ 28\mod_1405320711439_68.doc x @ 195209 @ 2 @ 1 11.4 Resistance data The data refer to resistance at 20°C. - Page 62 Laboratory Centrifuge Sigma 2-16P 11 Appendix - no data 1 resistant 2 practically resistant 3 partially resistant 4 not resistant Medium Formula Chromic acid Chromic potassium KCr(SO saturated sulphate Citric acid Citric acid Copper sulphate CuSO x 5H Cyclohexanol Decane Diaminoethane —...
- Page 63 Laboratory Centrifuge Sigma 2-16P 11 Appendix - no data 1 resistant 2 practically resistant 3 partially resistant 4 not resistant Medium Formula Isopropyl alcohol Lactic acid Magnesium chloride MgCl Mercuric chloride HgCl Mercury Methyl acetate Methyl alcohol Methyl benzene Methyl ethyl ketone...
- Page 64 Laboratory Centrifuge Sigma 2-16P 11 Appendix - no data 1 resistant 2 practically resistant 3 partially resistant 4 not resistant Medium Formula Sodium bisulphite NaHSO Sodium carbonate Sodium chloride NaCl Sodium hydroxide NaOH Sodium hydroxide NaOH Sodium sulfate Spirits Styrene...
-
Page 65: Ec Declaration Of Conformity
Laboratory Centrifuge Sigma 2-16P 11 Appendix Pos : 218 /100 Sig ma/110 BA Z entrifugen Sig ma (Proj ekte)/2-16P/110 Anhang/110-0060 Konfor mitäts er klär ung 2-16P @ 29\mod_1405321566376_68.doc x @ 197113 @ 2 @ 1 11.5 EC declaration of conformity Version 04/2007, Rev. - Page 66 Laboratory Centrifuge Sigma 2-16P 11 Appendix Version 04/2007, Rev. 2.15 of 15/09/2017 • sb 66 / 72 Translation from the original operating manual, part no. 0700602...
-
Page 67: Declaration Of Conformity - China Rohs 2
Laboratory Centrifuge Sigma 2-16P 11 Appendix Declaration of conformity – China RoHS 2 11.6 Version 04/2007, Rev. 2.15 of 15/09/2017 • sb 67 / 72 Translation from the original operating manual, part no. 0700602... - Page 68 Laboratory Centrifuge Sigma 2-16P 11 Appendix === Ende der Liste für T extmar ke Inhalt === Version 04/2007, Rev. 2.15 of 15/09/2017 • sb 68 / 72 Translation from the original operating manual, part no. 0700602...
-
Page 69: 12 Index
Laboratory Centrifuge Sigma 2-16P Index 12 Index Centrifuges - definition ..........9 Acceleration time Changes in colour ........48 - see also the softstart and softstop function Changes in structure ........48 ............37 Changing the RCF increments ....36 Accessories, cleaning and care .... -
Page 70: Translation From The Original Operating Manual, Part No
Laboratory Centrifuge Sigma 2-16P Index Density ..........12, 20 Imbalance monitoring system ....22 Different service life of rotors and accessories Importance of the operating manual ..... 9 ............21, 60 Important information ......... 16 Dimensions ..........24 Improper loading ........40 Direct hazard to the life and health ..... - Page 71 Laboratory Centrifuge Sigma 2-16P Index Measures in the event of hazards and accidents ..........23 Radioactive substances ....... 19, 44 Mechanical safety ........18 Radius ............14 Microhaematocrit rotor, cleaning and care . 46 Range of accessories ........ 55 Mode of operation ........13 RCF ............
- Page 72 Laboratory Centrifuge Sigma 2-16P Index Set-up and connection ....... 26 Technical data ........... 53 Short run ............ 35 Technical documentation ......54 Softstart and softstop function ....37 Temperature error ........42 Solvents ......... 20, 44, 45 Temperature value not reached ....40 Sound signal (buzzer) ........
Need help?
Do you have a question about the 2-16P and is the answer not in the manual?
Questions and answers