Product Identification; Dimensions; Installation Mechanical Installation - GE 845 Instruction Manual

GE
Digital Energy
845 Transformer Protection System
Chapter 2: Installation
Mechanical Installation

Product Identification

Dimensions

845 TRANSFORMER PROTECTION SYSTEM – INSTRUCTION MANUAL
Installation
This section describes the mechanical installation of the system, including dimensions for
mounting and information on module withdrawal and insertion.
The product identification label is located on the side panel of the 845. This label indicates
the product model, serial number, and date of manufacture.
Figure 2-1: Product Label
The dimensions (in inches [millimeters]) of the 845 are shown below. Additional dimensions
for mounting, and panel cutouts, are shown in the following sections.
2–1