Conversion Summary Report - GE 845 Instruction Manual

SOFTWARE INTERFACE
CAUTION:
Conversion Summary
Report
3–40
1. In the menu taskbar, click on Offline and select the New Settings File item. The
following Create New Setting s File dialog box appears, which allows for the setpoint
file conversion.
2. Select the Firmware Version and Order Code option for the new setpoint file.
3. For future reference, enter some useful information in the Description box to facilitate
the identification of the device and purpose for the file.
4. To select the file name and path for the new file, click the button beside the File Name
box.
5. To select the SR settings file used for initialization, click the Initialize Settings from SR
Settings File button.
6. To locate and select the file to convert, click the button beside the Initialize Settings
from SR Settings File box.
Only 745 files with version 7.4x are supported for conversion. If the offline file has a
version less than 7.4x it must be converted to file version 7.4x using the latest
EnerVista 745 setup software. To download the latest 745 setup software, see
gedigitalenergy.com
7. Click OK to begin the conversion and complete the process. Once this step is
completed, the new file, with a complete path, is added to the EnerVista 8 Series
Setup software environment.
At the end of the conversion process, the results are summarized in a conversion report.
The report is found under Device Definition in the offline file window.
Figure 3-14: Conversion Report in Offline Window
845 TRANSFORMER PROTECTION SYSTEM – INSTRUCTION MANUAL
CHAPTER 3: INTERFACES
http://