Information; Main Cpu - GE 845 Instruction Manual

CHAPTER 5: STATUS

Information

Main CPU

845 TRANSFORMER PROTECTION SYSTEM – INSTRUCTION MANUAL
Path:
Status > Communications > Remote Inputs
The present state of the 32 remote inputs are shown here. The state displayed is the
remote point unless the remote device has been established to be "Offline" in which case
the value shown is the programmed default state for the remote input.
GGIO1 INDICATIONS
Path:
Status > Communications > GGIO1 Indications
The present state of the 32 GGIO1 Indications are shown here. There are up to 32 GGIO
indications that can be used to map any FlexLogic operand into the IED 61850 information
model. Default value is Off.
GOOSE STATUS
Path:
Status > Communications > GOOSE STATUS
GOOSE 1 to 8 Status
Range: OFF, ON
Default: OFF
GOOSE STATUS
Path: Status > Communications > GOOSE HDR STATUS
GOOSE 1 to 8 H.Status
Range: OFF, ON
Default: OFF
Path:
Status > Information
The Information pages display fixed device information. the pages are divided into three
sections: Main CPU, Comms CPU, and Hardware Versions.
Path:
Status > Information > Main CPU
The Information related to the Main CPU is displayed here, see next figure.
Figure 5-4: Information for Main CPU
• Hardware Revision: The hardware revision of the relay
INFORMATION
5–5