Table of Contents
Advertisement
Step 4: Place the device
Caution:
To avoid electrical devices from interfering by the wireless signal, place
electrical devices one meter away from the device.
The device can be placed horizontally or vertically on a table. Place the device on a
higher place or near the window, or turn the USB interface connected with the data
card upright, so it can receive stronger signals.
Switching On/Off
Press the Power key to switch on the device; press and hold the Power key to
switch off the device.
Viewing the Running Status Through the Indicators
Power: Steady on and in green; the device is switched on successfully.
Modem: Steady on and in green; the data card is connected successfully.
Signal: Steady on and in green; the signal strength is strong. Blinking in green;
the signal strength is weak; Indicator off, the SIM card faults (The SIM card does
not exist or the PIN code is not authenticated) or the signal strength is inexistent.
WLAN: Steady on and in green; the WLAN is enabled. Blinking in green; data is
transmitting.
Dial-up Access
By default, the device dials up to access the Internet as required. You can directly
use the network services such as web browsing, and receiving or sending emails.
If you need to configure the other device-related parameters, you need to access
the device management page (http://192.168.1.1). For details, please read on.
Restoring the Factory Defaults
If you need to reconstruct the network or you forget the changes of some
parameters, you can restore factory defaults and reconfigure the device.
4
Advertisement
Table of Contents
