Huawei D100 User Manual page 12

Configuring PPP Dial-up Settings
PPP Connection: Select the dial-up access mode.
Auto: The device automatically connects to the Internet and does not disconnect
when no data is transmitted.
On Demand: The device automatically connects to the Internet when data
transmission exists. When the duration of no data transmission exceeds the
maximum idle time, the device disconnects the Internet connection.
Manual: The device connects to the Internet after you click Connect on the
connection page. For details, see "错误！未找到引用源。."
PPP Authentication: This service is provided by your ISP. For details, consult your
ISP.
Configuring WLAN Settings
(Name) SSID: Enter a name for your wireless local area network (WLAN).
The service set identifier (SSID) is used to identify a WLAN. A PC and the wireless
device can perform normal data communication only when they have the same
SSIDs. To ensure the WLAN security, do not use the default SSID. You can enter a
character string as the SSID, such as MyHome.
SSID Broadcast: Enable or disable the SSID broadcast.
Enabled: The device broadcasts the SSID of the WLAN and users can easily
access the WLAN. In this case, unauthorized users can also access the WLAN
because the SSID is broadcasted.
Disabled: The device does not broadcast the SSID of the WLAN. Before
accessing the WLAN, a user must obtain the SSID of the WLAN. In this case, the
WLAN security is improved.
Note:
For the convenience of users accessing the WLAN, you can select Enabled
for SSID Broadcast when you configure the WLAN setting. After the setting,
you can select Disable to improve the WLAN security.
Configuring the WLAN Encryption Mode
To access the WLAN, you must set the wireless security key on your PC to be the
same as that of the wireless device.
No Encryption
For the convenience of users accessing the WLAN, you can select NO
ENCRYPTION for the Encryption mode when you set up a WLAN. It is not
recommended to select this option in daily use.
8