Table of Contents
Advertisement
WLAN Basic Settings
Click
to access the WLAN Basic Settings page.
Selecting Interface IDs
Wireless Interface: It refers to the SSID and MAC address, and is used to identify
the wireless device.
SSID
Entering a name (SSID) for your WLAN.
Enabling or Disabling the SSID Broadcast
Enabling or Disabling the AP Isolation
On: The terminals (PCs) connecting to the device through the WLAN cannot
communicate with each other.
Off: The terminals (PCs) connecting to the device through the WLAN can
communicate with each other.
Selecting a Country
Country: It is used to identify the country. Different countries have different
standards on channel usage.
Selecting a WLAN Channel
Channel: It refers to the channel that the device works with. If you do not know
which channel to select, select Auto and the device can automatically search for
the channel.
Configuring the 802.11 Mode
There are four available modes, as shown in the following table.
Mode
54g Auto
The WLAN has the best compatibility in this mode.
54g
The WLAN has the best performance in this mode.
Performance
54g LRS
If the device has difficulties in communicating with devices
conforming to the IEEE 802.11b standards, select this mode.
802.11b Only
The device can only work in the low performance 802.11b
standard network mode.
Configuring the Transmission Rate
1. Select Auto, the device automatically searches the transmission rate.
2. Click Apply to submit the setting.
20
Description
Advertisement
Table of Contents
