Table of Contents
Advertisement
3. Click Ok.
You can also add a virtual server in the following way:
1. Select a port from the Common Port list. The Protocol, Status, Name, WAN
Port, and LAN Port will be set as the default values. If required, you can change
them.
2. Enter the IP Address.
3. Click Ok.
Changing a Virtual Server
1. Click
in the Modification column. The relevant virtual server is displayed.
2. Change the contents as required.
3. Click Ok.
Deleting a Virtual Server
Click
in the Modification column. The corresponding virtual server is
deleted.
Validating a Virtual Server
1. Add a virtual server or select a record in the virtual server table.
2. Select On for Enabled.
3. Click Ok.
4. Click Apply.
DMZ Settings
If your PC cannot run network applications through the device, you can set the
computer to access the Internet unlimitedly by configuring the IP address of the
computer in the demilitarized zone (DMZ).
However, the DMZ computer is not protected by the firewall. It is vulnerable to
attack and may also put other computers in the home network at risk.
1. Click
.
2. Select Enabled /Disabled for DMZ Status to enable or disable the DMZ
service.
3. Enter the local IP address of the computer that is specified as a DMZ host.
4. Click Apply.
Note:
Only one computer can be specified as a DMZ host at a time.
25
Advertisement
Table of Contents
