Table of Contents
Advertisement
Item
SIM
The SIM card is valid.
WAN
The PPP dial-up
connection is established.
WCDMA
The WCDMA network is
available.
Note:
If the device is registered with other network modes, the
corresponding network connection status is displayed.
SIG
The signal strength from weak to strong is shown as follows:
Viewing the Configuration Information
On the configuration page, you can view the current parameter configuration
information and the network connection status.
1. Click Basic Status.
2. Click Advanced on the right part of the page to view the advanced status.
3. Click Refresh to view the current status on the advanced status page.
Quick Setup
You can use the quick setup wizard to configure and maintain the basic parameters
of the device. Click Quick Setup to access the welcome page. Click Next to
configure the PPP profile settings.
Configuring PPP Profile Settings
Profile Name: Enter a profile name when the text box is empty.
Dial-up Number/PPP User Name/PPP Password: Enter these three
parameters provided by the internet service provider (ISP). The dial-up number is
used to initiate the network call; the PPP user name and PPP password is used to
obtain the service authorization provided by the ISP.
APN/IP Address: Select the mode for obtaining the access point name (APN)
and IP address. If the carrier provides the relevant parameters, select Static and
enter their values. Otherwise, select Dynamic and the device automatically
obtains them.
Description
The SIM card is not inserted
or is invalid.
The PPP dial-up connection
is not established.
The WCDMA network is
unavailable.
7
Advertisement
Table of Contents
