NEC SL1100 Feature Manual page 89

ISSUE 3.5
6. To change the amount of time Directory Dialing callers have to dial letters:
Program Program Name
Number
47-15-06 Time Limit for Dialing Com-
mands
7. To record a Directory Dialing Message:
Refer to Operation on page
The Directory Dialing Message is the Instruction Menu for the Call Routing Mailbox programmed
as a Directory Dialing Mailbox.
By default (without a custom message recorded), the Directory Dialing Message is "Please enter one
or more letters of the person's name, then press the pound key."
Program Program Name
Number
47-01-04 Outgoing Message Length
(Mbox Msg Length)
8. Enable or disable the ability of the Directory Dialing Mailbox to detect and route incoming faxes.
Program Program Name
Number
47-15-07 Fax Detection
9. Enable the Directory Dialing Mailbox caller to dial 0 for other options or # to return to the
Automated Attendant:
Program Program Name
Number
47-15-08 Next Call Routing Mailbox
10. Enable the Directory Dialing Mailbox to directly answer an outside call.
Make sure the active Answer Table uses the Call Routing Mailbox programmed as a Directory
Dialing Mailbox.
See Answer Table on page 2-19
By default, Answer Table 1 routes to Routing Mailbox 000, which is a Call Routing Mailbox.
InMail Feature Manual
Enter the new timeout duration (0 ~ 99 seconds).
If the caller waits too long to dial, the Directory Dialing Message re-
peats.
By default, Directory Dialing callers have 5 seconds to dial letters.
2-72.
This option sets the maximum message length (1 ~ 4095 seconds)
for Instruction Menus.
By default, this option is 120 seconds.
Enter 1 to enable Fax Detection; 0 to disable. If enabled, when the
Directory Dialing Mailbox detects incoming fax CNG tone, it routes
the call to the fax extension specified in 47-01-06 Fax Extension.
See Fax Detection on page 2-96
By default, Fax Detection is disabled (0).
Assign a Next Call Routing Mailbox (1 ~ 32) to the Directory Dialing
Mailbox.
To remove an assignment, press Flash key.
Once assigned, dialing # returns to the Automated Attendant. Dial-
ing 0 follows the 0 action of the Next Call Routing Mailbox.
By default, no Next Call Routing Mailbox is assigned.
for more.
SL1100
Description
Description
Description
for more.
Description
D
2-71