NEC SL1100 Feature Manual page 199

ISSUE 3.5
3. After the pager service answers, InMail sends a dial string which causes the pager display to
show the subscriber's mailbox number as well as the number of new messages in the mailbox.
• The notification is considered acknowledged if the recipient logs on to the mailbox. Notification
does not reoccur until the subscriber receives new messages.
• If the pager service doesn't answer, InMail retries the callout number. Message Notification may
eventually cancel if the callout remains unacknowledged.
Related Features
Security Code on page 2-220
To protect their mailbox from unauthorized access, the subscriber should be sure to record a Security
Code for your mailbox before enabling Message Notification.
Programming
Programming that Applies to All Types of Message Notification
1. Set up Trunk Group Routing.
Message Notification callouts use Trunk Group Routing (dial 9) when selecting outbound routes.
Program Program Name
Number
14-05-01 Trunk Groups
14-06-01 Trunk Group Routing
2. Set the maximum number on incomplete callout attempts.
Program Program Name
Number
47-01-14 Number of Callout Attempts
(Notify Call Attmpt)
3. Be sure Message Waiting lamp for Subscriber Mailboxes is on.
Program Program Name
Number
47-02-08 Message Waiting Lamp
(Update MW Lamp)
InMail Feature Manual
Description
Assign trunks to trunk groups (1 ~ 8).
By default, all trunks are in group 1.
Set up Trunk Group Routing. There are 8 routing tables, with 4
routes in each table.
By default, the first route in routing table 1 is trunk group 1. No
other entries are defined. This makes trunk group 1 the dial 9 route
by default.
Refer to Trunk Group Routing in the Programming Manual for more.
Description
Set how many times (1 ~ 99 attempts) InMail retries an incomplete
Message Notification callout. This total includes unacknowledged
callouts, callouts to a busy destination, and callouts to an unan-
swered destination. This option applies to pager and non-pager cal-
louts.
The default setting for this option is 1 attempt.
Description
Enter 1 (Yes) to enable Message Waiting lamp. If Message Waiting
lamp is disabled (0), Message Notification will not function.
By default, this option is 1 (Yes).
SL1100
M
2-181