NEC SL1100 Feature Manual page 215

ISSUE 3.5
Programming
Programming Subscriber Mailboxes
1. Assign the Next Call Routing Mailbox to a Subscriber Mailbox (if required).
Program Program Name
Number
47-02-14 Next Call Routing Mailbox
(Next CR Mbox)
2. Optionally allow the caller to dial additional digits (not just 0) once in the Next Call Routing
Mailbox.
Program Program Name
Number
47-02-13 Dialing Option
Programming Announcement Mailboxes
1. Assign the Next Call Routing Mailbox for the Announcement Mailbox (if required).
Program Program Name
Number
47-09-01 Next Call Routing Mailbox
(Next CR Mbox)
2. Enter the number of times the Announcement Mailbox message should repeat before routing to
the Next Call Routing Mailbox.
Program Program Name
Number
47-09-02 Repeat Count
3. Be sure the Announcement Mailbox does not hang up after playing its message.
Program Program Name
Number
47-09-03 Hang Up After
(HangUp)
InMail Feature Manual
Description
Specify the Routing Mailbox (1 ~ 32) that should provide the caller
leaving a message with additional dialing options.
By default, this option is 1 (Call Routing Mailbox 1). Call Routing
Mailbox numbers are 1 ~ 8.
Description
Enter 1 to enable additional dialing options.
By default, this option is disabled (0).
Description
Specify the Routing Mailbox (1 ~ 32) to which the caller should
route after hearing the Announcement Mailbox message.
By default, this option is 0 (Undefined).
Description
Specify the number of Announcement Mailbox message repeats (1
~ 10, or 0 for no repeats).
By default, this option is 0 (no repeats).
Description
Enter 0 (None) to disable this option.
By default, this option is disabled (0).
SL1100
N
2-197