Table of Contents
Advertisement
System Description
System Overview with Functional Variants
SmartKey code keypad with integrated reader
Functional variants
Reader
Non-contact reader for surface mounting or recessed
mounting (IP55 junction box).
SmartKey code keypad with integrated reader
Code keypad with integrated non-contact reader for
surface mounting or recessed mounting (IP55 junction box).
The SmartKey code keypad with integrated reader combines
the function of the reader + the SmartKey code keypad in one
unit.
Initial set-up and operation is the same as with one reader + one
code keypad. Instructions for start-up and operation are en-
closed with the corresponding device, reader or SmartKey code
keypad.
The reader for the SmartKey is located in the middle of the de-
vice (not visible from the outside). To operate, hold the SmartKey
up to the center of the code keypad at a maximum distance of 2
cm and press the button on the key.
Reader + lockable code keypad
Non-contact reader for surface mounting or recessed
mounting (IP55 junction box). Lockable code keypad
for surface mounting or recessed mounting
(recessed mounted with installation kit).
4
Advertisement
Table of Contents
