ABB PGC5000 Series Service Instructions Manual page 26

PGC5000
PGC5000 Series Service Instructions
INDICATOR ISSUE
Calibrating Schedule running an
analysis on Calibration
Stream
Validating Schedule runnign an
analysis on a Validation
Stream
Script Not Found Script specified in TCF
cannot be located
Missing Report Script cannot find the
report to be modified
Run Time Script exceeded allotted
Exceeded runtime
User Error #1 – 10 Script Asserts Error #1 – 10
Node Loss Device no longer
reachable on SHS CANbus
New Node Device added to SHS
CANbus
Address Conflict Two devices with same
address on SHS CANbus
Invalid State Combination of valve
states not allowed
Vol Flow Low Low Volumetric Flow lower
than Low Low Limit
Vol Flow Low Volumetric Flow lower
than Low Limit
Vol Flow High Volumetric Flow exceeds
High Limit
Vol Flow High High Volumetric Flow exceeds
High High Limit
Pressure Low Low Pressure lower than Low
Low Limit
Pressure Low Pressure lower than Low
Limit
Pressure High Pressure exceeds High
Limit
Pressure High Pressure exceeds High
High High Limit
Temp Low Low Temperature lower than
Low Low Limit
Temp Low Temperature lower than
Low Limit
Temp High Temperature exceeds High
Limit
Temp High High Temperature exceeds High
High Limit
Vol Flow Low Low Volumetric Flow lower
than Low Low Limit
Vol Flow Low Volumetric Flow Lower
than Low Limit
SI/PGC5000-EN, Rev B
RESOLUTION (CHECK & CORRECT)
Information Only.
Information Only.
Ensure Script is in the Script library.
Edit the analysis under the Analysis
tab. Script tCF must have a time
greater than the analysis cycle time.
From Programming tab, check
script logic, increase Max Runtime
variable.
User programmable indicators.
Information Only.
Check cables and communication
path on SHS CANbus.
Information Only.
Check SHS Node ID on device.
Correct Valve conflicts.
Information Only.
Information Only.
Information Only.
Information Only.
Information Only.
Information Only.
Information Only.
Information Only.
Information Only.
Information Only.
Information Only.
Information Only.
Information Only.
5 Diagnostics and troubleshooting
RESET SOURCE
AOC Schedule
AOC Schedule
Next Run Script
Next Run Script
Next Run Script
Next Run Script
AOC SHS
AOC SHS
AOC SHS
AOC DVM
AOC ARV
AOC ARV
AOC ARV
AOC ARV
AOC ARV
AOC ARV
AOC ARV
AOC ARV
AOC ARV
AOC ARV
AOC ARV
AOC ARV
AOC FastLoop
26