Electrostatic Discharge; Grounding Methods - HP ML110 G1 User Manual

B

Electrostatic Discharge

To prevent damage to the system, be aware of the precautions you need
to follow when setting up the system or handling parts. A discharge of
static electricity from a finger or other conductor may damage system
boards or other static-sensitive devices. This type of damage may reduce
the life expectancy of the device.
To prevent electrostatic damage, observe the following precautions:
• Avoid hand contact by transporting and storing products in static-safe
containers.
• Keep electrostatic-sensitive parts in their containers until they arrive at
static-free workstations.
• Place parts on a grounded surface before removing them from their
containers.
• Avoid touching pins, leads, or circuitry.
• Always be properly grounded when touching a static-sensitive
component or assembly.

Grounding methods

There are several methods for grounding. Use one or more of the
following methods when handling or installing electrostatic-sensitive parts:
• Use a wrist strap connected by a ground cord to a grounded
workstation or computer chassis. Wrist straps are flexible straps with a
minimum of 1 megohm ± 10 percent resistance in the ground cords.
To provide proper grounding, wear the strap snug against the skin.
• Use heel straps, toe straps, or boot straps at standing workstations.
Wear the straps on both feet when standing on conductive floors or
dissipating floor mats.
• Use conductive field service tools.
• Use a portable field service kit with a folding static-dissipating work
mat.
If you do not have any of the suggested equipment for proper grounding,
have an authorized reseller install the part.
NOTE:
product installation, contact your authorized reseller.
For more information on static electricity, or for assistance with
Storage Server user guide 51