Sharp FO-CC500 Service Manual page 136

Accessory cordless handset
Hide thumbs Also See for FO-CC500:
Table of Contents

Advertisement

FO-CC500A
FO-K01A
2-16.
1. To go on to download FLASH ROM, perform the following procedures.
1-1. Only perform procedures
1-2. Return to 2-1.
2. To complete downloading FLASH ROM, perform the following procedures.
2-1. Perform procedures described in Table 7.
2-2. Terminate "TeraTerm".
Table 7. Termination procedures
Cordless Handset DSS PWB (Cordless Handset PWB)
FAX machine DSS PWB (built into FAX machine)
(Cordless PWB)
FAX machine DSS PWB (Unit) (Cordless PWB)
3) System ID
Refer to the Operation Manual of FO-K01 as for writing the system ID on the Cordless Handset. (When you add a
Cordless Handset, the system ID is automatically written.)
1
2
and
described in Table 7.
1
2
Set the BAT SW of the Program loader BOX to OFF (down).
Remove the connector jointed to the Cordless Handset DSS PWB
(Cordless Handset PWB).
1
2
Turn off the FAX machine.
Remove the connector jointed to the FAX machine DSS PWB
(Cordless PWB).
1
2
Set the (h) PARK SW of the Program loader BOX to OFF (down).
Remove the connector jointed to the FAX machine DSS PWB
(Cordless PWB).
8 – 31

Advertisement

Table of Contents
loading

This manual is also suitable for:

Fo-k01

Table of Contents