Voltage Sequence Components Vmsqi; Disturbance Report Drprdre; Fault Locator Lmbrflo; Generic Measured Value Mvggio - ABB REC670 Operator's Manual

1MRK 511 188-UEN C
9.2.6.6
9.2.6.7
9.2.6.8
9.2.6.9
Operator's manual
There are sets of settings with some categories of parameter settings per set
instance of CMSQI.

Voltage sequence components VMSQI

Main menu/Settings/General settings/Monitoring/
VoltageSequenceComponents(MSQI)/VSQ
The voltage sequence components are where the user sets the limits and deadband
settings for voltage sequence components. The designation for zero sequence
voltage is 3U0, for positive sequence voltage is U1 and for negative sequence
voltage is U2.
There are sets of settings with some categories of parameter settings per set
instance of VMSQI

Disturbance report DRPRDRE

Main menu/Settings/General Settings/Monitoring/Disturbance Report/
DisturbanceReport(RDRE)
Displays available settings.
Binary signals
Main menu/Settings/General settings/Monitoring/Disturbance report/Binary
signals(RBDR)/Channel xx-yy
There are some groups of several channels with several binary outputs per channel.
Each channel has some settable parameters. These are operation, trig level,
indication MA and set LED.
Analog signals
Main menu/Settings/General settings/Monitoring/Disturbance report/Analog
signals(RADR)/Channel xx-yy
There are some groups of a number of channels with a number of analog signals
per channel. Each signal has some settable parameters such as operation, Nominal
value and trig values.

Fault locator LMBRFLO

Main menu/Settings/General Settings/Monitoring/FaultLocator(RFLO)/FLO
Displays available instance of fault locator LMBRFLO with some parameters.

Generic measured value MVGGIO

Main menu/Settings/General Settings/Monitoring/
GenericMeasuredValue(GGIO)/MV
Read and change settings
Section 9
51