Functions; Change Lock; Control; Apparatus Control - ABB REC670 Operator's Manual

1MRK 511 188-UEN C
9.2.4.4
9.2.4.5
9.2.5
9.2.5.1
Operator's manual
Local HMI setting parameters such as Language, Contrast level and Default menu
can be set here.

Functions

Main menu/Settings/General Settings/HMI/Functions
The settings here are used to determine the way information is presented in the
HMI. The two parameters available here allow the user to choose between miles
and kilometers for the presentation of distance and to determine the order in which
events are presented in the Event list.

Change lock

Main menu/Settings/General settings/HMI/Change lock
The operation of the Change lock function can be activated or deactivated here.

Control

Apparatus control

Overview
Under Control in General settings, parameters for Apparatus control can be
adjusted. These are the parameters for among others Bay control, Switch controller,
Reservation input, Circuit breakers and Circuit switches. The parameters include
delay times, dependencies, pulse times and characteristics.
Bay control QCBAY
Main menu/Settings/General settings/Control/ApparatusControl/
BayControl(CBAY)/CB
Displays up to six instances of the bay control function QCBAY with a setting that
gives the local operator priority over the remote operator or vice versa.
Bay reserve QCRSV
Main menu/Settings/General settings/Control/ApparatusControl/
BayReserve(CRSV)/CR
Displays up to four instances of the bay reserve function QCRSV with nine
parameter settings. The first is for setting the supervision time to cancel a
reservation and the other eight are for the reservation of the own bay only at the
selection of an apparatus.
Circuit breaker SXCBR
Main menu/Settings/General settings/Control/ApparatusControl/
CircuitBreaker(XCBR)/XC
Read and change settings
Section 9
47