Panasonic KX-NS1000 Pc Programming Manual page 370

9.15 PBX Configuration—[1-1] Configuration—Slot—V-IPEXT32—Port Property
Feature Manual References
10.1.17 IP-PT (IP Proprietary Telephone)
DTMF
Specifies the type of DTMF tone to be sent out.
Default
Outband (RFC2833)
Value Range
Inband, Outband (RFC2833)
Maintenance Console Location
9.15 PBX Configuration—[1-1] Configuration—Slot—V-IPEXT32—Port Property
Feature Manual References
10.1.17 IP-PT (IP Proprietary Telephone)
Payload Type
Specifies the payload type for DTMF tones using RFC2833. Programming this parameter is only necessary if
DTMF is set to Outband (RFC2833).
Default
101
Value Range
96–127
Maintenance Console Location
9.15 PBX Configuration—[1-1] Configuration—Slot—V-IPEXT32—Port Property
Feature Manual References
10.1.17 IP-PT (IP Proprietary Telephone)
Secondary Setting
The settings on this screen are for programming the Automatic Rerouting to Secondary PBX feature for use
among IP extensions in a networked environment. For details and conditions regarding the use of this feature,
refer to 2.1.7 Automatic Rerouting to Secondary PBX in the Feature Manual.
Setting Secondary Ports
Follow the steps below to designate secondary ports for IP extensions.
1.
Specify the secondary ports.
a.
Access the port property screen of the site where the ports will be set as secondary ports.
370 PC Programming Manual Document Version 2016-03