Panasonic KX-NS1000 Pc Programming Manual page 26

1.2.2 PC Programming Using Off-line Mode
Additional display language files may be made available. To add a display language not listed in the language
selection menu, select Additional language, and then click Browse to specify the language file. After
specifying a language file, click OK to change to the selected language.
VoIP Test Tool
Click the VoIP Test Tool button to launch the VoIP Test Tool. This tool is identical to the VoIP Test Tool
included with the Unified PC Maintenance Console for KX-TDA/KX-TDE/KX-NCP PBXs.
IP Terminal Utility
Click the IP Terminal button to launch the IP Terminal setup utility. This utility is identical to the IP Terminal
utility included with the Unified PC Maintenance Console for KX-TDA/KX-TDE/KX-NCP PBXs.
IP Trace File Converter
Click the IP Trace File Converter button to launch the IP Trace File Converter utility. This utility will convert
locally-saved IP trace file data collected by the system utilities listed below into a format that can be analyzed
by general packet analysis software tools.
•
7.4.2 Utility—Monitor/Trace—V-IPGW16 Protocol Trace
•
7.4.3 Utility—Monitor/Trace—V-SIPGW16 Protocol Trace
Others
Click this button to open the folder containing external applications. For example, the Import CSV Edit Tool
can be used as an external application.
Programming in Off-line Mode
Once you have logged in to Off-line Web Maintenance Console, programming is very similar to On-line mode.
The title bar will be colored differently from when in On-line mode:
Some items are not programmable when in Off-line mode, and those items will be grayed out. Some tools and
utilities are also not available in Off-line mode. For details, refer to 2.1.2 Access Levels.
Notice
•
In Off-line mode, changes made in 6.7 Tool—Screen Customize will not be reflected in On-line mode.
This is because these settings are not stored in the system data file (DCSYS).
•
When you load the system data file to the PBX, you must install any required activation keys in On-line
mode. Activation keys are required for mailboxes. Settings such as mailbox passwords will be cleared
if the number of activation keys for mailboxes is insufficient.
Uploading Programmed Settings to the PBX
When programming in Off-line mode, clicking the
file name for the system data file. This file can then be uploaded to the PBX in On-line mode using the "File
Transfer PC to PBX" utility. For details, refer to 7.2.1 Utility—File—File Transfer PC to PBX.
26 PC Programming Manual
When programming in On-line mode:
When programming in Off-line mode:
icon will open a save dialog box. Specify a location and
Document Version 2016-03