Printer Sharing; Connect Your Usb Printer To The Tg789Vac V2 - Technicolor TG789vac v2 Setup And User Manual

Modem router

Hide thumbs Also See for TG789vac v2:

Table of Contents

5.2 Printer sharing

Introduction

A TG789vac v2 USB port allows you to share your USB printer in your local network. This way everyone in your network can

use the same printer without having to buy an expensive network printer.

Requirements

The samba server must be enabled on the TG789vac v2 (this is the default setting).

For more information, see

Procedure

Proceed as follows:

1 Connect your USB printer to the TG789vac v2. For more information,

TG789vac v2" on page

2 Configure the printer sharing service on your TG789vac v2.

For more information, see

3 Install the printer on your computer.

For more information, see

5.2.1 Connect your USB printer to the TG789vac v2

Plug the USB cable of your printer in (one of) the USB port(s) of your TG789vac v2.

This document contains Technicolor proprietary and confidential information. Passing on and copying of this document, use, extraction and

communication of its contents, is not permitted without written authorization from Technicolor.

"Customizing the content sharing settings" on page

67.

"5.2.2 Enable the printer sharing service on your TG789vac v2" on page

"5.2.3 Installing the printer on your computer" on page

5 Content and Printer Sharing

64.

"5.2.1 Connect your USB printer to the

68.

69.

Table of Contents

Do you have a question about the TG789vac v2 and is the answer not in the manual?