Accessing The Tg789Vac V2 Web Interface From Your Local Network - Technicolor TG789vac v2 Setup And User Manual

4.1.1 Accessing the TG789vac v2 web interface from your
local network
Procedure
Proceed as follows:
1 Browse to http://192.168.1.1
wirelessly).
192.168.1.1 is the default IP address of your TG789vac v2. If you have changed the IP address of your
TG789vac v2, use this IP address instead.
2 The TG789vac v2 web interface appears. By default, you are logged in as guest. This means that some settings may be
hidden. To view all settings, click Sign In and enter your user name ( ) and password ( ).
If you did not change the default credentials, the user name is admin and the password is the ACCESS KEY that
is printed on the product label of your TG789vac v2.
3 If this is the first time that you sign in, the TG789vac v2 will offer you to change your password.
Select one of the options and then click Save. If you choose to change the password, type your current password in the
first box, type your new password twice and then click Change Password.
Your new password must contain at least 12 characters including both upper and lower case letters, at least one
number and at least one special character.
Allowed special characters are !, @, #, $, %, ^, &, *, ?, _, ~, -, ( and ).
Choose a password that you can easily remember. If you forget your password the only option is to completely
reset your TG789vac v2 (all your changes will be lost). For more information, see
page 83.
4 All settings are now available.
DMS3-CTC-25-191 v2.0. Copyright © 2017 Technicolor. All rights reserved.
This document contains Technicolor proprietary and confidential information. Passing on and copying of this document, use, extraction and
communication of its contents, is not permitted without written authorization from Technicolor.
on a computer or device that is currently connected to your TG789vac v2 (either wired or
4 TG789vac v2 web interface
"8.4 Reset to factory defaults" on
38