Philips HEARTSTART XLT M3500B Instructions For Use Manual page 51

M3500B HeartStart XLT Defibrillator/Monitor
If CPR is needed, press
time and the total duration of the Pause state, as shown:
Figure 3-15
Paused
Timer: 35 / 60
ANALYZE
RESUME
The total pause duration depends on the event preceding the Pause state. If
you entered the Pause state:
at the completion of a shock series or shortly after a shock is deliv-
ered, the duration is equal to the
ting (the default setting is 60 seconds).
when no shock was advised, the duration is equal to the
configuration setting, where NSA is an acronym for No Shock
Advised (the default setting is 180 seconds).
. While paused, a timer indicates the elapsed
Elapsed Time
Total Pause Duration
Shocks: 3
00:01:40
ERC Protocol
3
configuration set-
3-17