HobbyKing J3 CUB Instruction Manual

HobbyKing J3 CUB Instruction Manual

Aerobatic model planes

Advertisement

J3CUB
Aerobatic Model Planes
INSTRIJCTION MANIJAL
CE� 0 ®
MADE IN CHINA
The manufacturer reserve the right to modify the specification or printing errors without prior notice.

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the J3 CUB and is the answer not in the manual?

Questions and answers

Summary of Contents for HobbyKing J3 CUB

  • Page 1 J3CUB Aerobatic Model Planes INSTRIJCTION MANIJAL CE� 0 ® MADE IN CHINA The manufacturer reserve the right to modify the specification or printing errors without prior notice.
  • Page 2 INSTRUCTION MANUAL WARNING: This J3 Cub Electric R\C model is not a toy and is not suitable for children under 14 years. 1. Do not fly near: Houses or buildings, children's play areas, roads or traffic, railways, airports, overhead power lines and pylons. Do not fly near or over crowds of people or spectators.
  • Page 3 J3-CUB INSTRUCTION MANUAL Vertical Fin Horizontal Stabiliser Main Wing Cockpit Landing gear set Features: Powerful Propeller Driven Plane Will perform perfect aerobatic maneuvers, such as rolls, loops, and stable inverted flight; Excellent hedgehopping performance; Excellent stability in pitch; Wing Rod Cowl Easy to fly with steerable tailwheel;...
  • Page 4: Tools And Items

    J3-CUB INSTRUCTION MANUAL Tools and Items Assembly of the main landing gear: To assemble this airplane you will require the following tools. Glue the steel U/C wire to the Glue the scale parts to the Glue the scale parts to the steel wire for fairings of the main landing gear.
  • Page 5 Assembly of wing, main landing gear and propeller. Assembly of the tailplane, fin and tailwheel.
  • Page 6: Center Of Gravity

    J3-CUB INSTRUCTION MANUAL Center of gravity Pre-Flight Check 1.Check for any warps or damaged parts on main wing, fuselage or tail components. 2.Check the propeller and the adapter, make sure it is secure and all the screws are securely fastened. 3.Always check there are no other pilots using the same frequency(band) in the same area! 4.Securely fasten the main wing.
  • Page 7: Problem Solving

    J3-CUB INSTRUCTION MANUAL Flying Problem Solving Take-off: 1. Extend transmitter antenna all the way and check plane responds properly to transmitter the signals. Typical error Problem solving Problem 2. Place the model on the ground facing into wind. Hold in up elevator then gently open the throttle keeping the model straight with the rudder, ease of the elevator so that the tail rises a little and then the model will take off Charge the battery The battery is not full charged.

Table of Contents