DeWalt D26676 Instruction Manual page 8

E N G L I S H
g) Use the power tool, accessories and tool bits etc., in
accordance with these instructions taking into account
the working conditions and the work to be performed.
Use of the power tool for operations different from
those intended could result in a hazardous situation.
5) SERVICE
a) Have your power tool serviced by a qualified repair
person using only identical replacement parts. This will
ensure that the safety of the power tool is maintained.
Additional Specific Safety Rules for
Planers
Wait for the cutter to stop before setting the tool down.
An exposed cutter may engage the surface leading to
possible loss of control and serious injury.
Package contents
The package contains:
1 Planer
1 Parallel fence
1 Spanner
1 Instruction manual
1 Gauge
1 Sharpening holder
Check for damage to the tool, parts or
accessories which may have occurred during
transport.
Take the time to thoroughly read and understand
this manual prior to operation.
Description (fig. A & C)
Your D WALT high performance Planer D26676 has
E
been designed for professional planing of wood.
1 ON/OFF-switch
2 Lock button
3 Shavings discharge outlet
4 Planing depth adjustment knob
5 Planing depth graduation
6 Parallel fence tightening bolt
7 Hole for parallel fence
8 Side guard (excluding in some model)
9 Motor cover
10 Drive belt cover
11 Parking shoe
12 Parallel fense
Electrical safety
The electric motor has been designed for one
voltage only. Always check that the power supply
corresponds to the voltage on the rating plate.
8
Your D WALT tool is double insulated;
E
therefore no earth wire is required.
Mains plug replacement
(U.K. & Ireland only)
Should your mains plug need replacing and you
are competent to do this, proceed as instructed
below. If you are in doubt, contact an authorized
D WALT repair agent or a qualified electrician.
E
Disconnect the plug from the supply.
Cut off the plug and dispose of it safely; a plug
with bared copper conductors is dangerous if
engaged in a live socket outlet.
Only fit 13 Amperes BS1363A approved plugs
fitted with the correctly rated fuse (1).
The cable wire colours, or a letter, will be marked
at the connection points of most good quality
plugs. Attach the wires to their respective points
in the plug (see below). Brown is for Live (L) (2)
and Blue is for Neutral (N) (4).
Before replacing the top cover of the mains plug
ensure that the cable restraint (3) is holding the
outer sheath of the cable firmly and that the two
leads are correctly fixed at the terminal screws.
Never use a light socket.
Never connect the live (L) or neutral (N)
wires to the earth pin marked E or
For 115 V units with a power rating exceeding
1500 W, we recommend to fit a plug to BS4343
standard.
Using an extension cable
If an extension cable is required, use an approved
extension cable suitable for the power input of this
tool (see technical data). The minimum conductor
2
size is 1.5 mm . When using a cable reel, always
unwind the cable completely.
.
en - 3