DeWalt D26676 Instruction Manual page 10

E N G L I S H
Switching ON and OFF (fig. A)
To run the tool, press the ON/OFF-switch (1). For
continuous operation, press the lock-on button
(2) and release the ON/Off-switch.
To stop the tool, release the ON/OFF-switch. To
stop the tool in continuous operation, press the
ON/OFF-switch once more. Always switch OFF the
tool when work is finished and before unplugging.
Switching ON and OFF (safety switch) (fig. A)
If your planer is equipped with a safety switch to
prevent inadvertent operation, please follow the
below instruction.
To run the tool, press the lock-off button (2) and
subsequently press the ON/OFF-switch (1).
Release the lock-off button (2).
To stop the tool, release the ON/OFF-switch (1).
Always switch OFF the tool when work is finished
and before unplugging.
Do not switch the tool ON or OFF when
under load.
Planing (fig. A)
Switch the tool ON as described.
Slowly move the Planer over the workpiece.
The feed speed should not be too high,
especially when using the maximum
depth of cut and planing width.
Remember that several shallow cuts are
better than one deep cut.
Switch the tool OFF.
Your Planer is equipped with a parking shoe (11).
After switching OFF the tool can be put down
without waiting for the cutters to come to a
standstill.
CAUTION: Do not lock the trigger switch on
and engage the parking shoe. The vibration
of the running motor will cause the planer to
move, possibly falling from the work piece .
Whenever possible, connect a dust extraction
device designed in accordance with the relevant
regulations regarding dust emission.
10
Consult your dealer for further information on the
appropriate accessories.
Maintenance
Your D WALT Power Tool has been designed to
E
operate over a long period of time with a minimum
of maintenance. Continuous satisfactory operation
depends upon proper tool care and regular cleaning.
Lubrication
Your Power Tool requires no additional lubrication.
WARNING: Since accessories, other than
those offered by D
tested with this product, use of such
accessories with this tool could be
hazardous. To reduce the risk of injury,
only D WALT, recommended accessories
E
should be used with this product.
Cleaning
Keep the ventilation slots clear and regularly clean
the housing with a soft cloth.
Unwanted tools and the environment
Take your tool to an authorized D
agent where it will be disposed of in an
environmentally safe way.
WALT, have not been
E
WALT repair
E
en - 5