ABB COM600 Product Manual page 19

ABB
Grid Automation Controller
COM600
Product version: 4.0
Table 17. IEDs with connectivity packages supporting COM600 (applies for the
IEC 61850 and SPA protocols)
610 series IEDs
Feeder Protection REF610
Motor Protection REM610
Voltage Protection REU610
611 series IEDs
615 series IEDs
Recloser Protection and Control RER620
Feeder Protection Relay REX 521
SPAJ 140 series relays
Combined Overcurrent and Earth-fault Relay SPAJ 140 C
Combined Overcurrent and Earth-fault Relay SPAJ 141 C
Combined Overcurrent and Earth-fault Relay SPAJ 142 C
Combined Phase and Neutral Overcurrent Relay SPAJ 144 C
Stabilized Differential Relay SPAD 346 C
SACO 16D series units
Digital Annunciator Unit SACO 16D1
Digital Annunciator Unit SACO 16D3
Digital Annunciator Unit SACO 64D4
RE 500 series terminals
Feeder Terminal REF 541 / 543 / 545
Transformer Terminal RET 541/ 543 / 545
Motor and Generator Terminal REM 543 / 545
Feeder Terminal REF 542plus
Table 18. Hardware requirements for SAB600
Hardware
Free hard disk space
Table 19. Supported operating systems
Description
Microsoft Windows 2000, Windows XP Professional Edition SP2 or later, Windows 2003
Server, Vista, Vista Server 2008, Windows 7
1) Microsoft .NET Framework 3.5 is required for running SAB600. The software is automatically installed during the
®
installation of SAB600 if not already available on the PC.
Minimum
1 Gb
1)
1MRS756764 D
Recommended
1 .5Gb
19