Installing Your Refrigerator - Blomberg BRSBS 2130 User Manual

Installing Your Refrigerator

Placing and Installation
Caution: Never plug the refrigerator in to the wall outlet during installation. Otherwise,
risk of death or serious injury may arise.
If the entrance door of the room where the refrigerator will be installed is not wide enough
for the refrigerator to pass through, than call the authorized service to have them remove
the doors of your refrigerator and pass it sideways through the door.
1. Install your refrigerator to a place that allows ease of use.
2. Keep your refrigerator away from heat sources, humid places and direct sunlight.
3. There must be appropriate air ventilation around your refrigerator in order to achieve
an efficient operation. If the refrigerator is to be placed in a recess in the wall, there must
be at least 5 cm (2 inches) distance with the ceiling and at least 5 cm (2 inches) with the
wall.
If the floor is covered with a carpet, your product must be elevated 2.5 cm (1 inch) from
the floor.
4. Place your refrigerator on an even floor surface to prevent jolts.
5. Do not keep your refrigerator in ambient temperatures under 10°C (50 °F).
Usage area measures
Following figure shows the required place to allow you use your refrigerator most efficiently.
154 cm (60.63")
D
117 cm
(46.06")
6 EN
W