Configure Computer Basic Method - Mitsubishi Electric APRICOT FT//EX User Manual

6.3.5 Configure Computer
This selection guides you through the procedure for adding boards and options
to your computer. When you choose this selection, the screen displays a
graphical overview of the boards and options installed in your computer. (See
sample screen below.) When there are no resource conflicts, the ECU saves
this configuration information in a system configuration information (SCI)
file.
These are the boards and options currently detected by your computer. Use the
arrow keys or PgUp/PgDn to scroll through the list. If the list is complete, press
[Enter]. To add additional boards or options, press [Insert]. To remove a board or
option, use the arrow keys to select the board or option, then press [Delete].
System
Slot 1
Slot 2
Enter=Continue <Esc=Cancel> <Ins=Add> <Del=Remove>
Sample Screen: Basic Configuration
Before you return to the main menu, write down or print the list of the switch,
jumper, and software settings you need to change for ISA boards. If no CFG
file accompanies an option or board you want to install, follow the instructions
that go with the option to install it.
If there is a conflict of resources and you need to change functions, edit
resources, or perform advanced tasks, move to the next option.
6-6 Owner's Handbook
Your Current Configuration
Basic Method