Canon X-07 User Manual page 5

FCC REGULATION
This equipment generates and uses radio frequency energy and if not in­
stalled and used properly, that is, in strict accorda n ce with the manufac­
turer's instructions, may cause interference to radio and television reception.
It has been type tested and found to comply with the limits for a Class B
computing device in accordance with the specifications in Subpart J of Part
15
of FCC Rules, which are designed to provide reasonable protection
against such interference in a residential installation. However, there is no
guarantee that interference will not occur in a particular installation. If this
equipment does cause interference to radio or television reception, which can
be determined by turning the equipment off and on, the user is encouraged
to try to correct the interference by one or more of the following measures:
Reorient the receiving antenna
•
Relocate the computer with respect to the receiver
•
Move the computer away from the receiver
•
Plug the computer into a different outlet so that computer and receiver
•
are on different branch circuits.
If necessary, the user should consult the dealer or an experienced
radio/television technician for additional suggestions. The user may find the
following booklet prepared by the Federal Communications Commission
helpful:
"How to Identify and Resolve Radio-TV Interference Problems".
This booklet is available from the U.S. Government Printing Office,
Washington. DC
Warning: This equipment has been certified to comply with the limits for
a Class B computing device, pursuant to Subpart J of Part
Only peripherals (computer input/output devices, terminals, printers, etc.)
certified to comply with the Class B limits may be attached to this computer.
Operation with non-certified peripherals is likely to result in interference to
radio and TV reception.
20402,
Stock No.
004-000-00345-4.
15
of FCC Rules.