Canon X-07 User Manual page 41

1.5
Memory of the X-07
1.5.1 Saving programs
The previous sections explained the BASIC language and programs. Once a
program has been created, it can be executed many times by using the RUN
command. Accordingly, it is necessary to save the program in some way.
The contents of memory are not erased even when the power of the
turned OFF (they are not saved if the batteries are changed without using the
AC adaptor). Therefore, at least one program can be saved. However, most of
the time you would like to save several or even many programs.
With the X-07,
1) Save programs in the RAM file.
2) Save programs in
3) Use a cassette recorder to record programs onto cassette tapes.
Methods and
2)
to save programs in the RAM file (1).
32
such programs can be saved by using the following methods:
4K
memory cards.
are explained in the later sections. This section explains how
3)
X-07
is