2.3.5 Level sensor confirmation
●
Confirms operation of level sensors for the main ink tank, ink reservoir, and makeup reservoir.
№
Container type
1
Main ink tank
2
3
Ink reservoir
4
Makeup reservoir
●
Perform this test in a "Stop" or "Standby" state.
1 Press Adjustment/operational checkout on the maintenance menu.
If Adjustment/operational checkout is not displayed on the maintenance menu, set the
service personnel maintenance mode on the login user selection screen.
For information on changing to the service personnel maintenance mode,
refer to "2.1 Setting of service personnel maintenance mode."
The adjustment/operational checkout menu is then displayed.
Adjust./oper. checkout
Excitation
adjustment
Auto-phase gain
adjustment
Level sensor
Too high
Initial level
Too low
Too low
[Stop
]
Charge voltage
Phase margin test
confirmation
Level sensor
Heating unit
confirmation
confirmation
2-15
2015.07.07 12:45
Com=0
Start
Manual
up
HOME
Back
Level sensor confirmation