Adjusting The Focus Of The Image; Adjusting The Vertical Angle Of The Projector; To Raise; To Lower - Philips bClever SV1 User Manual

Adjusting the focus
of the image
Focus ring
STAN DBY/O STAN DBY/O
N N
Adjusting the vertical angle
of the projector
A
B
C

Keystone correction

Philips Multimedia Projector
3. Set up
• Use the Focus ring to adjust the focus of the image.

To raise

• Keep knob A pressed and lift to raise the projector.
– The Height/Level Adjuster B will come out.
Use the horizontal adjuster C to fine-tune the display angle.
3

To lower

• Keep knob A pressed and gently lower the projector.
• Use the Focus Ring and Zoom Ring to readjust the focus and size of the image.
Use the horizontal adjuster C to fine-tune the display angle.
3
If projector and screen are not properly placed, the picture will be distorted, producing a
keystoned image (picture top width larger than picture bottom width or vice versa/picture left
side width larger than picture right side width or vice versa). When a keystoned image occurs
the image ratio (4:3, 16:9) will still be guaranteed.This is especially important when the projector
is being used together with an 'intelligent whiteboard'.
'Keystone correction' allows you to correct picture distortion of the vertical keystone type by
internal scaling.
• Use Keystone on the remote control to widen the upper part of the image.
• Use Keystone on the remote control to widen the lower part of the image.
– The keystone slider appears on the screen.
• This correction function also is accessible through the 'Keystone' option in the 'Set up' menu
of the On Screen Display (OSD) menu.
12
English User guide bClever SV1
>