Table of contents Introduction �������������������������������������������������3 5 Connect to playback devices �����������14 Dear customer ...............3 Connect to devices through HDMI™ ....14 About this user manual ..........3 Connect to devices using HDMI™ ARC ....14 What’s in the box ............3 Connect to devices through S/PDIF ....15 Customer service centre ..........3 6 Other features �������������������������������������...
Introduction What’s in the box Screeneo U5 projector (SCN550/INT) Remote control with 2x AAA batteries Dear customer Lifting screws x 4 Thank you for purchasing this projector. Quick Start Guide We hope you enjoy this product and the many Power cable with plug x 4...
Have your product checked by Do not remove the type label from this product, an authorised service centre. Keep the product as this will void the warranty. away from open flames (e.g. candles). Screeneo U5 SCN550/INT...
Power supply • As with any bright light source, do not stare into the beam, RG2 IEC 62471-5:2015. Check whether the mains voltage of the power • When turning on the projector, make sure supply matches the mains voltage available at no one within projection range is looking the setup location.
For connection with USB devices, such as flash drives, mobile hard disks, etc. input For connection with external devices with HDMI™ ports (eARC). input For connection with external devices with HDMI™ ports. Connection ports Connect to a suitable power supply. Kensington Security Slot™ Screeneo U5 SCN550/INT...
Side view Remote control Ventilation mesh Speakers Bottom view Access voice search function (Google Assistant). Confirm a selection or entry. Access the Settings menu. Height adjusting kickstand Return to Android TV home screen. Lifting screw hole Electric focus adjustment. Mute/unmute projector audio. Decrease or increase volume.
Settings - Projector Settings -Display Mode, then select Front Desktop. Front ceiling Mount the projector on the ceiling with upside up in front of the projection screen. A projector mount is required to mount the projector on ceiling. Screeneo U5 SCN550/INT...
4 Operation To adjust projection to the correct position, go to Settings - Projector Settings -Display Mode, then select Rear Hoisting. Connect power supply Screen size and installation CAUTION! distance Always use the button to turn the The distance between projector and screen projector on or off.
• For best wireless performance and coverage, use an 802.11n router and the 5GHz band. Select the icon in the upper right corner of the screen, and press OK. Then go to Network & Internet - Wi-Fi. Screeneo U5 SCN550/INT...
Only the Accounts & Sign In. Follow the on-screen preloaded apps have been tested by prompts to sign into your account. Philips. System home page Picture adjustment Adjust image position This section takes the front table installation method as an example to explain the picture adjustment for users’...
Page 12
Move projector rightwards. Image falls to the right of screen Left trapezoid Move projector leftwards. Move projector counter-clockwise. Part of the image is above the screen Right trapezoid Move projector downwards or move screen up. Move projector clockwise. Screeneo U5 SCN550/INT...
Focus adjustment Press the key on the remote control, or press the key then select Projector Settings - Focus Adjustment. Adjust the focus according to the screen prompts until the screen becomes clear from blurry. Select an app and press OK to show the options.
If your external speakers or AV receiver are HDMI™ ARC-compatible, you can connect them to the projector’s port using an optional HDMI™ cable. Make sure the Device Preferences - Sound - eARC option is enabled and HDMI 2 is selected as the input source. Screeneo U5 SCN550/INT...
6 Other features Connect the HDMI™ cable to the ARC- compatible HDMI™ port on your external speakers or AV receiver. Connect the other end to the Connect to external port on the rear of the projector. speakers or headphones COAXIAL SPDIF RS-232 Connect external speakers or headphones to...
Use EasyLink For better streaming performance, use a 5 GHz Wi-Fi network. This projector supports Philips EasyLink which uses the HDMI™ CEC (Consumer Electronics Control) protocol. You can use a single remote control to turn on or off the EasyLink compliant Google, Google Play, YouTube, Android TV and devices that are connected through HDMI™.
7 Change settings This section helps you change the settings of the projector. To access the Settings menu, use the Navigation buttons to select the icon in the upper right corner of the screen, then press OK. Use the Navigation buttons and OK to select and change settings.
Select Wi-Fi then press OK to turn Wi-Fi on or off. • Connect the projector to the Internet. Select an available Wi-Fi network from the list, then use the pop-up virtual keyboard to input your Wi-Fi password. • Add a new Wi-Fi network. Screeneo U5 SCN550/INT...
Projector settings Quick settings Quick settings appear when you are in HDMI™ Select to access Settings menu. input. If you plug an external device, select this Select Projector Settings, and then press device in the HDMI™ input and press the remote control, a new horizontal menu will Through the Projector Settings, you can appear in the bottom of screen.
Follow the on-screen instructions to complete the update. Update software Troubleshooting The latest software of the projector can be found on www.philips.com/support for you to get the best features and support from the Power cycling projector. If a problem occurs that cannot be corrected...
Page 21
Problems Solutions The projector cannot be turned on. • Disconnect and reconnect the power cable, and try to turn the projector on again. The projector turns itself off. • When the projector is running for a long period of time, the surface becomes hot. Ventilate the projector properly, with at least 30 cm clearness around all the sides of the projector.
This device complies with Industry Canada CAN The Declaration of Compliance can be ICES-3 (B)/NMB-3(B) consulted on the site www.philips.com. RSS-Gen & RSS-247 statement: This device FCC statement complies with Industry Canada RSS standard(s). Operation is subject to the following two 15�19 Labeling requirements�...
Page 24
Screeneo Innovation SA shall not be liable for any damages or problems arising from the use of any options or any consumable materials other than those designated as original Screeneo Innovation SA/PHILIPS products or Screeneo Innovation SA/PHILIPS approved products. Screeneo Innovation SA shall not be held liable...
Page 25
Route de Lully 5c - 1131 Tolochenaz - Switzerland Philips and the Philips Shield Emblem are registered trademarks of Koninklijke Philips N.V. and are used under license. Screeneo Innovation SA is the warrantor in relation to the product with which this booklet was packaged.